Audi 200 20v Avant - Shed the 18 year old boy:)

AudiQuattros · Post by **AudiQuattros** » Sat Dec 06, 2014 8:52 am

loxxrider wrote:Dmitry, where did you get that main girdle? This piece

eBay, Pope bids won from Germany

AudiQuattros · Post by **AudiQuattros** » Sat Dec 06, 2014 9:02 am

2.5TYPE44 wrote:Дмитрий, у меня есть три вопроса.
1. Как вы делали вентиляции на пассажирских крыло
2. Насколько сложно было перейти на новый стиль, двойной кондиционер панель управления
3. Что вы делали, чтобы получить рулевое колесо с тремя спицами, чтобы соответствовать

Thank you for writing so, but let's use English

he did under international .. I do not see any reason to adjust.

1)Wing ventilation, made to me. deflector is welded from MB, like from a "sprinter"
2) No, not hard. only it is necessary to connect the wiring. I would plug in a regular place, instead of native climates. schemes understood. evaporator take from A6 / S6 c4, stove also from them, and so kondeya tube remains native. or you can change everything on c4 body. control unit take from S4 91-94 or V8 4.2 92-94
3) speech about adjustable column? and the steering wheel from the S6?

AudiQuattros · Post by **AudiQuattros** » Sat Dec 06, 2014 9:03 am

90quattrocoupe wrote:
2.5TYPE44 wrote:Дмитрий, у меня есть три вопроса.
1. Как вы делали вентиляции на пассажирских крыло
2. Насколько сложно было перейти на новый стиль, двойной кондиционер панель управления
3. Что вы делали, чтобы получить рулевое колесо с тремя спицами, чтобы соответствовать
For those of us who do not read russian.

Dmitry , I have three questions.
1. How did you do on passenger ventilation wing?
2. How difficult was it to go to the new style , dual air conditioner control panel?
3. What did you do to get the steering wheel with three spokes to match?

Greg W.

Thanks ))

stin · Post by **stin** » Sat Dec 06, 2014 3:23 pm

Girdles with or without bolts and "washers" can be bought from http://webshop.cp-service.se/en/67-audi. Lots of good stuff for 5cyl 20vt

Also billet main bearing caps etc.

AudiQuattros · Post by **AudiQuattros** » Thu Dec 11, 2014 11:55 am

Small crash

and now

VEMS assembled today tried to start it . on my father's brain did not see the MAP sensor. my sees everything . but it must be calibrated by .. I have something to back happened , it hurts that horror. barely walk .

20VAvant · Post by **20VAvant** » Thu Dec 11, 2014 12:12 pm

AudiQuattros wrote:

Do I spy a Kentucky Fried Chicken?!?

How is the part availability where you are located?

amd is the best · Post by **amd is the best** » Thu Dec 11, 2014 12:27 pm

I love how the VEMS is in a factory ECU box!

loxxrider · Post by **loxxrider** » Thu Dec 11, 2014 5:23 pm

stin wrote:Girdles with or without bolts and "washers" can be bought from http://webshop.cp-service.se/en/67-audi. Lots of good stuff for 5cyl 20vt Also billet main bearing caps etc.

Ah very good. Thank you!

AudiQuattros · Post by **AudiQuattros** » Fri Dec 12, 2014 2:44 am

20VAvant wrote:
AudiQuattros wrote:
Do I spy a Kentucky Fried Chicken?!?

How is the part availability where you are located?

hahaha )) I'm in St. Petersburg, Russia . As we say in the cultural capital . If someone when you go to us for any reason , write, meet ))
https://www.google.ru/maps/place/WC/@60 ... 1b0535024a

AudiQuattros · Post by **AudiQuattros** » Fri Dec 12, 2014 2:47 am

amd is the best wrote:I love how the VEMS is in a factory ECU box!

Of course not so beautiful as when you buy ready . but cheaper. in which case you can remove vems . and put regular brain and go !

AudiQuattros · Post by **AudiQuattros** » Sun Dec 14, 2014 3:20 pm

unfolded intake manifold. the week will change valve cover , will AAN ventilated head. manifold and put a big front cooler .

loxxrider · Post by **loxxrider** » Sun Dec 14, 2014 3:27 pm

You flipped the intake plenum around? Interesting idea.

AudiQuattros · Post by **AudiQuattros** » Sun Dec 14, 2014 3:33 pm

loxxrider wrote:You flipped the intake plenum around? Interesting idea.

Yes , unfolded

pilihp2 · Post by **pilihp2** » Sun Dec 14, 2014 4:05 pm

I'm surprised it fits so well. Is the Power Steering pump still connected and working? Is your A/C Condensor removed?

AudiQuattros · Post by **AudiQuattros** » Sun Dec 14, 2014 4:22 pm

we arrange club meetings . Turbo-Quattro.com
Come from all over the country's S-ochniki))

/wj0RmlzqMk0.jpg[/img]

If anyone would ever wish to come to Russia , walk and so on. then let me know! meet ! You can even locate the house ... tours on request ))
in St. Petersburg stunning white nights ! best time to go to us

Just Machine friend BMW 3 e21 m20 Holset35 0.9bar

AudiQuattros · Post by **AudiQuattros** » Sun Dec 14, 2014 4:24 pm

pilihp2 wrote:I'm surprised it fits so well. Is the Power Steering pump still connected and working? Is your A/C Condensor removed?

I have all the costs of the AAN. And everything works fine . )
I removed the air conditioner . because I do not like it . I can not stand it. alas ..

AudiQuattros · Post by **AudiQuattros** » Sun Dec 21, 2014 4:41 pm

AudiQuattros · Post by **AudiQuattros** » Mon Dec 22, 2014 3:00 am

themagellan · Post by **themagellan** » Mon Dec 22, 2014 9:38 pm

Would love to come visit! Amazing updates and thank you for the pictures!

AudiQuattros · Post by **AudiQuattros** » Wed Dec 24, 2014 5:52 am

themagellan wrote:Would love to come visit! Amazing updates and thank you for the pictures!

I have always been very helpful information that I get the following for the different machines at different sites! and then all gathered in one place! and it's very cool! glad that I was invited here

will be able to come, I unfortunately do not have means to get out while abroad, but would love to go to America!

AudiQuattros · Post by **AudiQuattros** » Wed Dec 24, 2014 6:02 am

RAS 20V · Post by **RAS 20V** » Wed Jan 07, 2015 4:03 am

Re: Audi 200 20v Avant - Shed the 18 year old boy:)

Postby loxxrider » Fri Dec 05, 2014 5:54 pm
Dmitry, where did you get that main girdle? This piece

Attachments

image.jpg
image.jpg (63.97 KiB) Viewed 504 times

-Chris

Chris, hello.
I bought this item on Ebay - http://www.ebay.com/itm/Blockversteifun ... 5d53a47c0f

Alexey.

RAS 20V · Post by **RAS 20V** » Mon Jan 12, 2015 3:38 pm

loxxrider wrote:Dmitry, where did you get that main girdle? This piece

Chris, hello.
I bought this item on Ebay - http://www.ebay.com/itm/Blockversteifun ... 5d53a47c0f

Alexey.

loxxrider · Post by **loxxrider** » Mon Jan 12, 2015 7:28 pm

RAS 20V wrote:
loxxrider wrote:Dmitry, where did you get that main girdle? This piece

Chris, hello.
I bought this item on Ebay - http://www.ebay.com/itm/Blockversteifun ... 5d53a47c0f

Alexey.

Thanks!

90quattrocoupe · Post by **90quattrocoupe** » Fri Jan 16, 2015 12:44 am

Great pics.

Greg W.