Jim Green's 90q 20vt - 636whp 07k
- audifreakjim
- Posts: 2144
- Joined: Sun Mar 03, 2013 3:00 pm
Carl, I kinda owe you a ride as your cyl head is in the car! Unfortunately, it's just crazy right now. I'll try and find a moment.
Small update, I moved the WB display to somewhere a little more stealthy. Remember this is all in the name of not giving the policia a reason to pop my hood when I get pulled over.
Relocated the knock light and water injection LED into the cluster below the VDO lettering.
Hmm, where could it be?
There it is
Visability really sucks, but I hardly use it anyways, and when I do it's mainly for peak and hold. I'm going to make it so I can pop it out of there an stick it somewhere else for tuning, or tilt it towards me a little so I can see it better.
What else, yea, filled up the tank with 91 since E85 isn't available in socal. Feck the car's slow now. Bring on sea level!
Small update, I moved the WB display to somewhere a little more stealthy. Remember this is all in the name of not giving the policia a reason to pop my hood when I get pulled over.
Relocated the knock light and water injection LED into the cluster below the VDO lettering.
Hmm, where could it be?
There it is
Visability really sucks, but I hardly use it anyways, and when I do it's mainly for peak and hold. I'm going to make it so I can pop it out of there an stick it somewhere else for tuning, or tilt it towards me a little so I can see it better.
What else, yea, filled up the tank with 91 since E85 isn't available in socal. Feck the car's slow now. Bring on sea level!
-
s2 on the way
- audifreakjim
- Posts: 2144
- Joined: Sun Mar 03, 2013 3:00 pm
did I hear something about crushing your car if you're found guilty of street racing?
Marc Swanson
Proprietor, EFI Motorsport
Proprietor, EFI Motorsport
- audifreakjim
- Posts: 2144
- Joined: Sun Mar 03, 2013 3:00 pm
Yep, I actually had a friend email me asking if this was my car.
http://www.msnbc.msn.com/id/19339955/
http://www.msnbc.msn.com/id/19339955/
- audifreakjim
- Posts: 2144
- Joined: Sun Mar 03, 2013 3:00 pm
- audifreakjim
- Posts: 2144
- Joined: Sun Mar 03, 2013 3:00 pm
The sea level mod rocks! It feels like I've stepped down a few turbo sizes in spool time and I can drive one gear higher than normal. I've run a few quick logs as a quick check, but so far the tune seems pretty good. I haven't driven the car much as I've really been enjoying the A6, and I've become a bit of a beach bum the last two weeks. In fact, I'm posting from the beach now. The goal for this weekend is to get some nice pics of both cars together.
-
Longitudinal
- Posts: 107
- Joined: Sun Mar 03, 2013 1:29 am
- audifreakjim
- Posts: 2144
- Joined: Sun Mar 03, 2013 3:00 pm
-
birdmanmt
-
90quattrocoupe
- Posts: 269
- Joined: Fri Mar 01, 2013 12:21 pm
- Location: Long Beach, CA.
Jim,
Since you are in Socal now, you should try to make this GTG. It is the largest one in CA.
http://socaleuro.com/forum/showthread.php?t=22399
A lot of nice cars, very few old school, but there is one UrQ that is usually there which is converted to RHD.
Greg W.
Since you are in Socal now, you should try to make this GTG. It is the largest one in CA.
http://socaleuro.com/forum/showthread.php?t=22399
A lot of nice cars, very few old school, but there is one UrQ that is usually there which is converted to RHD.
Greg W.
- audifreakjim
- Posts: 2144
- Joined: Sun Mar 03, 2013 3:00 pm
-
noriceforyou
-
Longitudinal
- Posts: 107
- Joined: Sun Mar 03, 2013 1:29 am
Heh. I can barely stand to be barefoot. My feet have at least socks unless I am in the shower. You hippies and your "let your toes hang out" attitude...birdmanmt wrote:Bump for flip-flops. I only wear clothes toe'd shoes in winter and at work, I prefer driving barefoot!
Nice pic, Jim. Enjoying California?
- audifreakjim
- Posts: 2144
- Joined: Sun Mar 03, 2013 3:00 pm
Got the Zeitronix back from, Zeitronix with the upgraded linear WB output today. Hooked it up using the resistors below to drop the voltage from 0-5v to 0-1v.
WB_OUT+>----[XXXXX]-------[YYYYY]------<WB_OUT-(TO ECU_GND too)
Output is taken from the node where resistor XXXXX and resistor YYYYY meet.
XXXXX = 4.02K 1%, 1/4w
YYYYY = 1.00k 1%, 1/4w
Divides 5.00v to just over 1.00v
After tinkering with the scaling I have it spot on and the car has never run smoother. Javad and crew were right, the damn thing almost runs itself in closed loop.
I've also made some good progress with project OEM, maybe some pics tomorrow. :-D
WB_OUT+>----[XXXXX]-------[YYYYY]------<WB_OUT-(TO ECU_GND too)
Output is taken from the node where resistor XXXXX and resistor YYYYY meet.
XXXXX = 4.02K 1%, 1/4w
YYYYY = 1.00k 1%, 1/4w
Divides 5.00v to just over 1.00v
After tinkering with the scaling I have it spot on and the car has never run smoother. Javad and crew were right, the damn thing almost runs itself in closed loop.
I've also made some good progress with project OEM, maybe some pics tomorrow. :-D