CQ center armrest installed. pic

Post by **Marc** » Fri Mar 17, 2006 4:00 pm

pkw wrote:
a4kquattro wrote:nice diy solution

I paid the $20 for the dealer part tho, call me lazy
for what part?

the timing belt backing plate.

Alloutofdonuts · Post by **Alloutofdonuts** » Fri Mar 17, 2006 5:16 pm

pkw wrote:
a4kquattro wrote:nice diy solution

I paid the $20 for the dealer part tho, call me lazy
for what part?

lol...whew! you thought the dealer had one of the tensioner dealies you just made from scratch? My mind said no effing way, man. LOL. Pretty cool and innovative stuff you got there though.

Post by **Marc** » Fri Mar 17, 2006 6:32 pm

ah, I see. The goal was to change tension without loosening the water pump. I thought you just couldn't get the 20v backing plate.. since they are different than the 20v backing plates.. Nevermind then 8-)

quattro87 · Post by **quattro87** » Fri Mar 17, 2006 8:43 pm

the timing belt backing plate.

Mark, You don't happen to have a part number?

Post by **Marc** » Fri Mar 17, 2006 9:08 pm

quattro87 wrote:
the timing belt backing plate.

Mark, You don't happen to have a part number?

I dont have etka infront of me at the moment, but I'll check when I get back in the office (or someone can beat me to the punch..)

quattro87 · Post by **quattro87** » Fri Mar 17, 2006 9:20 pm

Did you get the front cover also?

Post by **Marc** » Fri Mar 17, 2006 9:54 pm

quattro87 wrote:Did you get the front cover also?

yep.

And the 3b wiring cover cause I liked the look 8-)

Alloutofdonuts · Post by **Alloutofdonuts** » Sat Mar 18, 2006 6:16 am

Sorry I just have to say, god that's sexy! With all that red in there, maybe it's just the spring talking, but does that make anyone else want to hump something? :tard: LOL :-D

pkw · Post by **pkw** » Sat Mar 18, 2006 2:51 pm

whew, yes i used my 7a backing plate but added a hole in it for my new tensioner and just had to be anal and seal it up nice. thought you were going to say you found a timing belt to work. after me going through about 400 gates part numbers i was kind of hoping i had not missed one.

Post by **Marc** » Tue Mar 21, 2006 4:31 pm

quattro87 wrote:
the timing belt backing plate.

Mark, You don't happen to have a part number?

just getting back to this,

034 109 143 B

quattro87 · Post by **quattro87** » Sat Mar 25, 2006 9:29 am

Thanks Mark

doncez · Post by **doncez** » Mon Jul 10, 2006 10:39 pm

how is it going? any updates? :-)

pkw · Post by **pkw** » Fri Aug 11, 2006 6:43 am

well, it is coming slowly but surely. it is going well, just slowly. i am happy with everything though. it is turning out really neat. always a lot of distractions. my digital cammera moved out but i may find another one :wink: my target date for starting is aug 19th because my audi is blocking another car of mine that i want to rally cross on the 19th.

pkw · Post by **pkw** » Thu Aug 31, 2006 11:13 am

i did not make my aug 19th date for starting so i could relax and i did some of the other small things, and well, it was just time to start it, so i did. i did not run it for long because of the lack of coolant. start-up went well. :woowoo:
few more things before i rip it down the road. i will have to get some more pics going.

peter

JShadzi · Post by **JShadzi** » Thu Aug 31, 2006 11:21 am

:woowoo:

Josh · Post by **Josh** » Thu Aug 31, 2006 6:58 pm

There is a dealer solution for the timing belt. The aan/aby/Adu engine came with an adjustable idle pulley. :wink:

pkw · Post by **pkw** » Mon Sep 18, 2006 6:35 am

an update. the only thing i was worried about with this build was the car being too sluggish off of boost.... not a problem. i am sure the low, close gearing and it being lighter weight than a big bodied audi all help. the ENGINE AND TURBO ARE A GREAT COMBO. this car is much better than a 5ktq which is where i pretty much draw the line. so, in summation i have a very strong bottom end that is stronger in some ways than the high dollar combos folks are building. :woowoo:

speedydtp247 · Post by **speedydtp247** » Mon Sep 18, 2006 7:58 am

awesome work

you need to take/post more pics. whenever i get money saved up you wanna turbo swap my car?

pkw · Post by **pkw** » Tue Sep 19, 2006 7:16 am

you got a camera speedy? mine moved out with the ex-girlfriend.

pkw · Post by **pkw** » Wed Oct 04, 2006 4:57 pm

for the record: i am adding a saab apc knock sensor section to the car...
http://www.motorgeek.com/phpBB2/viewtop ... sc&start=0

pkw · Post by **pkw** » Wed Oct 04, 2006 5:06 pm

FYI...in messing with mine, i think i found a mistake regarding the sensitivity adjustment of the apc unit. AFAIK, COUNTER CLOCK-WISE IS MORE SENSITIVE......so, for the record....
http://www.motorgeek.com/phpBB2/viewtop ... 754#144754

SteveAngry · Post by **SteveAngry** » Wed Oct 04, 2006 6:05 pm

I drove by your house last week. You were gone. I was hoping to get to check out your project since I was in the area.

Steve

pkw · Post by **pkw** » Fri Oct 06, 2006 11:46 am

steve, you can just shoot me a pm next time. speedy pops over with his supercharged a4 30v v6. he is supposed to pop over after work for me to look at his coupe. so feel free, we can get a group together.

SteveAngry · Post by **SteveAngry** » Sat Oct 07, 2006 10:30 am

pkw wrote:steve, you can just shoot me a pm next time. speedy pops over with his supercharged a4 30v v6. he is supposed to pop over after work for me to look at his coupe. so feel free, we can get a group together.

Yeah, LMk the next time speedy's coming over, I'll stop bye. Do you still have my phone number? PM if you don't...

Steve

pkw · Post by **pkw** » Fri Oct 13, 2006 9:49 am

stock bat location, ac, 7a intake and TB & rad... (also my own flavor of coil on plug and injector inserts)

Attachment ( 5896 ) : enginePL.jpg

CQ center armrest installed. pic

i started my IIc / mod mc2 short block/7a head CQ