Josh's 2.5 200QT.

Document and share your build!
User avatar
chaloux
Posts: 3167
Joined: Wed Feb 27, 2013 11:43 am
Location: Muskoka, Ontario, Canada

Re: Josh's 2.5 200QT.

Post by chaloux »

Soooooon?
Matt

18 Silverado 1500 work pig, roof rack and tonneau cover
11 Jetta sedan TDI DSG, rear muffler delete
GONE :( 87 4ktq - 4 FOX SNAKES

Image
Hank
Posts: 1718
Joined: Tue Feb 26, 2013 1:16 am

Re: Josh's 2.5 200QT.

Post by Hank »

Shop sure felt lonely without this monster in it today. I'll cherish those 160mph pulls uphill on the I-15 for a while with Josh giggling.
User avatar
chaloux
Posts: 3167
Joined: Wed Feb 27, 2013 11:43 am
Location: Muskoka, Ontario, Canada

Re: Josh's 2.5 200QT.

Post by chaloux »

Aghhhhhhhhh Hank you are being a jerk!!! lol! I expect MUCHO media from Josh! Need a full report, final numbers, etc...
Matt

18 Silverado 1500 work pig, roof rack and tonneau cover
11 Jetta sedan TDI DSG, rear muffler delete
GONE :( 87 4ktq - 4 FOX SNAKES

Image
2.5TYPE44
Posts: 461
Joined: Tue Mar 05, 2013 5:31 pm

Re: Josh's 2.5 200QT.

Post by 2.5TYPE44 »

Yeah, what a trip. Really too much power and not enough brake. Trying to slow down from being sling shoted to that speed had the brakes smoking and totally faded out. Had to use engine braking as best as possible. The pulls felt like the type of acceleration on my Kawasaki ZX10RR Definitely enough power to get you in jail or worse. 1st, 2nd, and 3rd gear pulls are as much as you can handle and takes full attention. It will take some serious balls to try to push the car in 6th gear. :drive: Good for adrenaline junkies or pulling up next to some unsuspecting victim. First time to drive the car in years. Love it! Definelty has to have coil overs and massive brakes. It is going to take some serious discipline to drive the car normally and not hard boost pulling around just to feel your gut get sucked into the seat and hear the turbo spool up. I think Hank was yelling something about having kids and starting to get a little nervous trying to put his feet through the floor and gripping the door handle. Didn't need to ask him to put his seatbelt on :rofl:
User avatar
ringbearer
Posts: 1282
Joined: Wed Feb 27, 2013 12:50 pm
Location: Nor-Cal

Re: Josh's 2.5 200QT.

Post by ringbearer »

:)
2.5TYPE44
Posts: 461
Joined: Tue Mar 05, 2013 5:31 pm

Re: Josh's 2.5 200QT.

Post by 2.5TYPE44 »

This was a long time coming and I lost patience many times along the way and thought I would never get to drive it again. It has come a long way since pulling out the 20 valve and 5 speed. I owe a big thanks to these guys that directly had part in this somehow.

:ty:
Jeff
Hank
Marc
Colin
Josh
Ben
Nick
Chris
Matt
User avatar
chaloux
Posts: 3167
Joined: Wed Feb 27, 2013 11:43 am
Location: Muskoka, Ontario, Canada

Re: Josh's 2.5 200QT.

Post by chaloux »

Awesome! So happy that the car is straight up ridiculous. Now git some brakes on there!
Matt

18 Silverado 1500 work pig, roof rack and tonneau cover
11 Jetta sedan TDI DSG, rear muffler delete
GONE :( 87 4ktq - 4 FOX SNAKES

Image
User avatar
loxxrider
Posts: 6642
Joined: Wed Feb 27, 2013 7:46 am
Location: Jupiter, FL / Somewhere, PA

Re: Josh's 2.5 200QT.

Post by loxxrider »

Hell yeah! So glad to hear that this has turned out to your liking. Can't wait to see some footage of this one day! Fastest 10v-bodied t44 ever? Most likely :)
-Chris

'91 Audi 200 20v - Revver/BAT project
'91 Audi 200 20v Avant
'01 Anthracite M5
'90 M3
'85 Euro 635csi
'12 X3
E34 530i (maybe rear-mount soon)
User avatar
Foscora
Posts: 149
Joined: Mon Dec 16, 2013 2:28 pm
Location: Le Mans, France

Re: Josh's 2.5 200QT.

Post by Foscora »

2.5TYPE44 wrote:I might have a deal on these mega rare amber D11 V8 fog lights. Whenever I get my car back, I will see if they will look ok next to the clear turn signals. These were supposedly a limited edition for D11's in France. Here is the only picture I could find of them. I'm thinking it will look better next to the CAC clear turn signals rather than the standard turn signals.

If you didn't find I can take a look, I know a few people that may have those ;)

Don't forget you have a few frenchies on PP guys, we may be helpul ;)

And just "for science", in France, until early 90's, cars had to have yellow beams (ou yellow tainted glasses)

For exemple, this E36 is "OEM"

Image
2.5TYPE44
Posts: 461
Joined: Tue Mar 05, 2013 5:31 pm

Re: Josh's 2.5 200QT.

Post by 2.5TYPE44 »

If you can find a set, I definitely want them. I have been trying to contact the person that I know has them but he only answers his phone every couple of months. It would be much appreciated.
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: Josh's 2.5 200QT.

Post by Kuma »

i can call scott for you if you want Josh. Hes hard to get a hold of sometimes, even for me
2.5TYPE44
Posts: 461
Joined: Tue Mar 05, 2013 5:31 pm

Re: Josh's 2.5 200QT.

Post by 2.5TYPE44 »

Just got a new set. I think it's going to pretty good looking and definitely rare. Now I need to do the 20v fender/V8 front bumper conversion I have been stocking up on to use them.
User avatar
chaloux
Posts: 3167
Joined: Wed Feb 27, 2013 11:43 am
Location: Muskoka, Ontario, Canada

Re: Josh's 2.5 200QT.

Post by chaloux »

What about brakes?
Matt

18 Silverado 1500 work pig, roof rack and tonneau cover
11 Jetta sedan TDI DSG, rear muffler delete
GONE :( 87 4ktq - 4 FOX SNAKES

Image
2.5TYPE44
Posts: 461
Joined: Tue Mar 05, 2013 5:31 pm

Re: Josh's 2.5 200QT.

Post by 2.5TYPE44 »

:D Like these...
Attachments
image.jpg
image.jpg (2 MiB) Viewed 37702 times
User avatar
ringbearer
Posts: 1282
Joined: Wed Feb 27, 2013 12:50 pm
Location: Nor-Cal

Re: Josh's 2.5 200QT.

Post by ringbearer »

Very nice!
User avatar
dana
Posts: 951
Joined: Mon Oct 14, 2013 8:54 am

Re: Josh's 2.5 200QT.

Post by dana »

i cannot believe we haven't seen videos of this monster yet!
current:
-mk4 tdi wagon with some mods
-TDI b3 90q, holset turbo, be strong little connecting rods!
-the turbo tractor
past:
-11 second 90q junker
-20vt swapped 90q winter beater
-efi 20vt 4kq
-way too many other long gone urs's, 200's 4000's, b5's
User avatar
chaloux
Posts: 3167
Joined: Wed Feb 27, 2013 11:43 am
Location: Muskoka, Ontario, Canada

Re: Josh's 2.5 200QT.

Post by chaloux »

Yeah no kidding!
Matt

18 Silverado 1500 work pig, roof rack and tonneau cover
11 Jetta sedan TDI DSG, rear muffler delete
GONE :( 87 4ktq - 4 FOX SNAKES

Image
User avatar
PRY4SNO
Posts: 2430
Joined: Sun Mar 03, 2013 5:14 pm
Location: Edmonton, AB

Re: Josh's 2.5 200QT.

Post by PRY4SNO »

3rd
Find me on Instagram @pry4sno

|| 2010 Golf Sportwagen TDI /// #farmenwagen
|| 2002 Dodge Ram 2500 24vt 4x4 #bertancummins
|| 1992 80 quattro 20v /// Eventual AAN'd Winter Sled
|| 1990 Coupe quattro /// Because Racecar
User avatar
loxxrider
Posts: 6642
Joined: Wed Feb 27, 2013 7:46 am
Location: Jupiter, FL / Somewhere, PA

Re: Josh's 2.5 200QT.

Post by loxxrider »

PRY4SNO wrote:3rd


:metoo:
-Chris

'91 Audi 200 20v - Revver/BAT project
'91 Audi 200 20v Avant
'01 Anthracite M5
'90 M3
'85 Euro 635csi
'12 X3
E34 530i (maybe rear-mount soon)
Aktapod
Posts: 443
Joined: Wed Dec 18, 2013 11:51 pm
Location: Denver, CO

Re: Josh's 2.5 200QT.

Post by Aktapod »

loxxrider wrote:
PRY4SNO wrote:3rd


:metoo:

Fifth! :D
Kevin (Sven)
- 1991 200 20vt K24-7400 AAN
- 1991 200 20vt Avant K24-7400 VEMS
- 1992 Audi V8 5-speed swap + ABZ
- 2002 Audi S8 6-speed swap
- 1979 Audi Fox quattro 20vt
- 2003 RS6 6mt Stage 2
2.5TYPE44
Posts: 461
Joined: Tue Mar 05, 2013 5:31 pm

Re: Josh's 2.5 200QT.

Post by 2.5TYPE44 »

I have a go pro and might make a video this week. I have been home for over a week now and it has been raining the whole time I have been here.
A buddy of mine has a new 6 speed Camaro SS with a 6.2 liter motor in it. I want to run against him when I make the video. He was wanting to play around and run against me until I gave him a ride and now he only wants to race me if he uses his CBR 1000RR.
2.5TYPE44
Posts: 461
Joined: Tue Mar 05, 2013 5:31 pm

Re: Josh's 2.5 200QT.

Post by 2.5TYPE44 »

My VEMS Bluetooth adapter and power cord came in today. I also found a 6 foot long USB-serial cable at Radio Shack for $24.00 to connect to the laptop.
Attachments
image.jpg
image.jpg (1.29 MiB) Viewed 37486 times
2.5TYPE44
Posts: 461
Joined: Tue Mar 05, 2013 5:31 pm

Re: Josh's 2.5 200QT.

Post by 2.5TYPE44 »

French V8 fogs and CAC clears...
Attachments
image.jpg
image.jpg (1.05 MiB) Viewed 37386 times
User avatar
PRY4SNO
Posts: 2430
Joined: Sun Mar 03, 2013 5:14 pm
Location: Edmonton, AB

Re: Josh's 2.5 200QT.

Post by PRY4SNO »

How about some of them vids?
Find me on Instagram @pry4sno

|| 2010 Golf Sportwagen TDI /// #farmenwagen
|| 2002 Dodge Ram 2500 24vt 4x4 #bertancummins
|| 1992 80 quattro 20v /// Eventual AAN'd Winter Sled
|| 1990 Coupe quattro /// Because Racecar
2.5TYPE44
Posts: 461
Joined: Tue Mar 05, 2013 5:31 pm

Re: Josh's 2.5 200QT.

Post by 2.5TYPE44 »

I have a couple days of delay. I'm waiting on longer wheel bolts. I ordered them from ECS Tuning and they should be in on Wednesday. When I put larger brakes, I had to get 8mm spacers from Apikol for the wheels to clear the Porsche 996 calipers. The 8mm spacers make it where I have to find longer bolts and I couldn't find them "on the shelves" at any local stores in Houston. Bigger brakes were mandatory. There were hot molten specs of steel flying off of the rotors and embedded themselves into the aluminum wheels when they hit. Soon though. I also ordered more Wilwood racing brake fluid that has a boiling point of 417 degrees ferenheit. I also put some stainless steel brake lines.
Attachments
image.jpg
image.jpg (1.7 MiB) Viewed 37324 times
Post Reply