fender mods for tire clearance. 315/60 content

Document and share your build!
Post Reply
User avatar
speeding-g60
Posts: 2152
Joined: Fri Mar 01, 2013 10:46 am

fender mods for tire clearance. 315/60 content

Post by speeding-g60 »

needed some room for tires. so i stretched the rear wheel arches 4" towards the front. the front end will be stretched completely (hood, fenders, etc ) the same 4".

done all of this myself with some pretty good guidance from an excellent chassis builder.

Image

Image

Image

testing a 32" x 14" wide on a 14" wide wheel as this is the size i will probably run when i learn to drive this thing.

Image

Image

both sides done and cut. only driver side reassembled.

Image

Image

Image

Image

putting 3/4" backing strip in so we have something to weld to. sheared all of these strips. and the complicated section at the body moulding area, i used factory material there and split it .

Image

Image

hand formed the filler plate.

Image

Image

Image

as he tacks these spots, he pulls the body work out and then tacks it. to keep its shape and prevent warpage. its not completed yet but it is visually good for clearance. and this is the wheel/tire i will use for the street. 315/60-15 on a 12" wide wheel, aka 30 tall by 13 wide. these are my training wheels so to speak. and YES it will be titled and reg'd and streetable.

Image

Image

Image

then a trial fit with the side skirts. gonna be sorta low there ;) :nuts:

Image
User avatar
PRY4SNO
Posts: 2430
Joined: Sun Mar 03, 2013 5:14 pm
Location: Edmonton, AB

Re: fender mods for tire clearance. 315/60 content

Post by PRY4SNO »

woah
Find me on Instagram @pry4sno

|| 2010 Golf Sportwagen TDI /// #farmenwagen
|| 2002 Dodge Ram 2500 24vt 4x4 #bertancummins
|| 1992 80 quattro 20v /// Eventual AAN'd Winter Sled
|| 1990 Coupe quattro /// Because Racecar
User avatar
Marc
Posts: 1586
Joined: Wed Feb 27, 2013 1:33 pm

Re: fender mods for tire clearance. 315/60 content

Post by Marc »

still doped up from the surgery? hope you feel better, and keep the updates coming.
Marc Swanson
Proprietor, EFI Motorsport
User avatar
loxxrider
Posts: 6642
Joined: Wed Feb 27, 2013 7:46 am
Location: Jupiter, FL / Somewhere, PA

Re: fender mods for tire clearance. 315/60 content

Post by loxxrider »

Cool!
-Chris

'91 Audi 200 20v - Revver/BAT project
'91 Audi 200 20v Avant
'01 Anthracite M5
'90 M3
'85 Euro 635csi
'12 X3
E34 530i (maybe rear-mount soon)
User avatar
speeding-g60
Posts: 2152
Joined: Fri Mar 01, 2013 10:46 am

Re: fender mods for tire clearance. 315/60 content

Post by speeding-g60 »

this is the last. high as a kite now and no worky for months into the future. they will work on it though now that i get to pay him haha

but yeah i just a little bit ago turned the pump up to 6 (on scale of 2 to 14) as it has awoken and it is pissed. ml/hr of whatever is in there starts with R and ends in Caine, its delivered via a tube going a couple inches deep into the neck. i get to pull it out in a couple days haha.

Image

Image

Image

Image

this was about an hour after surgery, was pretty freakin high right here.

[youtube]https://www.youtube.com/watch?v=vh2kWCYMpcY[/youtube]
EDIGREG
Posts: 1219
Joined: Tue Feb 26, 2013 12:50 am

Re: fender mods for tire clearance. 315/60 content

Post by EDIGREG »

yikes...get well soon. I can't wait to see this thing run!
Ed
Image
User avatar
themagellan
Posts: 873
Joined: Tue Mar 05, 2013 10:36 am

Re: fender mods for tire clearance. 315/60 content

Post by themagellan »

aw man, looks like Morhphine pump hate that noise every 10 minutes. Was this a work related accident - best wishes to a speedy recovery man, love watching this build.
User avatar
All_Euro
Posts: 319
Joined: Sun Mar 03, 2013 10:59 pm

Re: fender mods for tire clearance. 315/60 content

Post by All_Euro »

Youch - hope your recovery goes well... car's looking good btw :beer:
Work - Houzz / linkedin
Play - Haldex Swap
mr_aj_johnson
Posts: 220
Joined: Mon Apr 22, 2013 11:01 am

Re: fender mods for tire clearance. 315/60 content

Post by mr_aj_johnson »

If your insurance paid for the icebox, be sure to keep it. Should plug right in to a cool shirt. (or with some very simple changes anyway depending on MFR)
User avatar
AngryTaco
Posts: 2657
Joined: Sun Mar 03, 2013 11:38 pm
Location: Hayden Lake, Idaho

Re: fender mods for tire clearance. 315/60 content

Post by AngryTaco »

Great. I am now the 2nd biggest tire guy here. Damn you aaron!
1986 4000cs Turbo Quattro
2001 Dodge Dakota R/T Standard Cab
1990 V8 quattro
1995 urS6

-Hersh Performance and Racing Products-
Most orders are being refused until further notice. Please PM

Powerflex Dealer

#thuglife
Post Reply