Parts Rep Thread

PRY4SNO · Post by **PRY4SNO** » Mon May 19, 2014 7:21 pm

There's a few parts I'm interested in, wondering if you guys can offer any BTDT or links to prove/debunk parts I'm not familiar with. Feel free to post up with parts you're looking for info on as well.

-- Synapse Engineering Synchronic 40mm Wastegate
http://synapseengineering.pinnaclecart. ... uct&id=545

-- Daetschwerks DW300 Fuel Pump
http://www.deatschwerks.com/resources/f ... -pump-tech

my2000apb · Post by **my2000apb** » Mon May 19, 2014 8:41 pm

links aren't working for me

PRY4SNO · Post by **PRY4SNO** » Mon May 19, 2014 8:53 pm

Links fixed, thanks for the headsup

PRY4SNO · Post by **PRY4SNO** » Fri May 23, 2014 3:47 pm

Well, I bit the bullet on the Syncronic WG. Should be interesting to test back to back with Tial.

Next up on the wish list is injectors.

Anyone have any experience with Genesis II injectors? I've been reading up on Scott@USRT's posts on vortex and he's got some pretty amazing points. These are unmodified and offer superior atomization compared to your average ev14 cores one shop or another have bored out.

http://www.usrallyteam.com/index.php?ma ... ts_id=1897"]Injectors link

alxdgr8 · Post by **alxdgr8** » Fri May 23, 2014 3:51 pm

I've never heard of a synapse wg lasting very long. Lots of reviews of broken ones getting replaced by tials after a few months.

Sent from my XT1060 using Tapatalk

PRY4SNO · Post by **PRY4SNO** » Fri May 23, 2014 3:55 pm

LOL a little late with that tidbit.

Still, I'll take whatever links you've got.

All_Euro · Post by **All_Euro** » Sat May 24, 2014 12:38 am

Slightly different I know, but my Synchronic DV has been flawless... unicorn?

PRY4SNO · Post by **PRY4SNO** » Sat May 24, 2014 12:44 am

It definitely got (reluctantly) rave reviews from MotoIQ:

http://www.motoiq.com/MagazineArticles/ ... Valve.aspx

UrSobsessed · Post by **UrSobsessed** » Sat May 24, 2014 6:40 pm

Marc @ EFIx sells the Deatschwerks DW300 pump. From the statistics it looks to flow slightly less than the Bosch 044 pump and is supposedly MUCH quieter. He can comment to these points as I'm sure he's installed a few at this point. Even though he sells them, I'd trust his opinion as unbiased.

PRY4SNO · Post by **PRY4SNO** » Sat May 24, 2014 6:47 pm

My urs4 has a dw300 and it is inaudible, in a word.

Just a new brand to me, wanted some comments on the product.

PRY4SNO · Post by **PRY4SNO** » Mon May 26, 2014 4:20 pm

Thoughts on how deep is the max for IC clearance? Using oe s2 bumpers, really don't want to have to butcher them. What I've been reading says about 3" or so to clear.

Treadstone TRV1859B
Overall Size 20" x 15.25" x 3.50"
http://www.treadstoneperformance.com/pr ... ler++720HP

Parts Rep Thread

Parts Rep Thread

Re: Parts Rep Thread

Re: Parts Rep Thread

Re: Parts Rep Thread

Re: Parts Rep Thread

Re: Parts Rep Thread

Re: Parts Rep Thread

Re: Parts Rep Thread

Re: Parts Rep Thread

Re: Parts Rep Thread

Re: Parts Rep Thread