UrS6 Diff started leaking.

[Quattro20v]

Hi, my 95 S6 differential started leaking, where the driveshaft connects, and where the passenger side CV Axle connects. I cannot seam to find these seals. Do any of you know where i could get these seals? Thank you.

[20VAvant]

Hi, my 95 S6 differential started leaking, where the driveshaft connects, and where the passenger side CV Axle connects. I cannot seam to find these seals. Do any of you know where i could get these seals? Thank you.

These?

http://www.germanautoparts.com/Audi/S6/ ... sion/454/1

[Quattro20v]

Thanks, as i understand this is the DIY, for the left and the right one:http://12v.org/urs/FredMsAudiUrS4RearDifferentialRight&LeftSealDIY.pdf. Is the procedure for the front one similar to these? Could i change these seals by myself without any experience on the diff seals?

[20VAvant]

Thanks, as i understand this is the DIY, for the left and the right one:http://12v.org/urs/FredMsAudiUrS4RearDifferentialRight&LeftSealDIY.pdf. Is the procedure for the front one similar to these? Could i change these seals by myself without any experience on the diff seals?

The rear S6 differential is pretty similar to the rear 200 differential. I have not done the front one so I cannot confirm. I actually used the mentioned link for reference when I replaced both seals a few months ago. The seals pulled right out, but make sure you measure depth before doing so to ensure that you install them to the correct depth.

[Quattro20v]

I will try not to screw up on those two, might get somebody to help me out with them. Im going to look a little more online, on how to replace that front one though. Thanks for the info.