Cheap Parts - Name your own price and save...

Buy and Sell your parts here
Post Reply
Toph
Posts: 314
Joined: Sat Mar 02, 2013 9:29 am
Location: NH

Cheap Parts - Name your own price and save...

Post by Toph »

No prices, what is it worth to you?


Coupe Quattro:
ABS Pump
ABS Computer under back seat
Fuel rail
Intake manifold
MAF
ECU - 893 906 266B Hitachi 2plug
Hydraulic brake booster
Grey interior, only what's listed:
-Door handles
-Rear trunk carpet set
-Kick panels
-Grey plastic door sill trims
-Grey cargo receiver/tweeter trims


200
20v Oil Cooler
20v power steering pump with some lines
20v brake bomb
20v Intercooler
4 - whiteish doors with glass
Front bumper
Rear Bumper
Grey dash
Black rear carpet for avant
Avant rear side glass (between C and D pillar, both sides)

1995 S6 Oil Cooler with lines - one has a slight bend

WAY too many engine/transmission mount arms, so break yours soon before these are worth their weight in aluminum!

Things I would take in trade:
v8/UrS Front hubs
b4 Front uprights
CQ sunroof motor
14" or 15" small truck mud tires for my 4k
4k prop shaft
Very good condition CQ rear subframe

I know I'm missing some parts from the list, I'll update this as I dig them up.

Pictures in no particular order

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
Last edited by Toph on Sun Feb 02, 2014 12:40 pm, edited 2 times in total.
90 Coupe Quattro - 3b + 01e
87 4000 - future trail rig
00 a6 2.7t 6speed - winter beater
User avatar
20VAvant
Posts: 370
Joined: Tue Apr 09, 2013 1:47 pm
Location: Florence, KY

Re: Cheap Parts - Name your own price and save...

Post by 20VAvant »

On the front bumper for the 200 do you have the black grille inlay on the bottom? Are you willing to split them up?
-2015 Lexus RX350 - Been promoted to dad duty.

-2014 Lexus IS350 - SOLD
-2015 Yamaha FZ-07 - SOLD
-2005 Honda CRF230F - SOLD
-2002 Dodge Ram 3500 5.9 Cummins 6 Speed - SOLD
-1991 200 20VTQ Avant - VEMS - SOLD
-2008 Dodge Ram 2500 - 6.7 Cummins - SOLD
Toph
Posts: 314
Joined: Sat Mar 02, 2013 9:29 am
Location: NH

Re: Cheap Parts - Name your own price and save...

Post by Toph »

I'll have a look a little later. If I do, I will surely split them up since the rest of it could be stripped for aluminum scrap.
90 Coupe Quattro - 3b + 01e
87 4000 - future trail rig
00 a6 2.7t 6speed - winter beater
User avatar
20VAvant
Posts: 370
Joined: Tue Apr 09, 2013 1:47 pm
Location: Florence, KY

Re: Cheap Parts - Name your own price and save...

Post by 20VAvant »

Thanks, mine is in okay shape but I want to explore the idea of adding some fog lights and don't want to cut into my only one. :D
-2015 Lexus RX350 - Been promoted to dad duty.

-2014 Lexus IS350 - SOLD
-2015 Yamaha FZ-07 - SOLD
-2005 Honda CRF230F - SOLD
-2002 Dodge Ram 3500 5.9 Cummins 6 Speed - SOLD
-1991 200 20VTQ Avant - VEMS - SOLD
-2008 Dodge Ram 2500 - 6.7 Cummins - SOLD
ur20v
Posts: 228
Joined: Sun Mar 03, 2013 10:47 am
Location: NOVA

Re: Cheap Parts - Name your own price and save...

Post by ur20v »

Is the 4k fwd front swaybar the same as an early CQ? (With stamped steel control arms)
2005 A4 Ultrasport - K04'd, AEB head, GIAC tuned, still pokey
2001 TT 225 quattro Roadster - Stage 2+, looking for B&M shifter
2001 S4 - Tial 770R'd 3.1 stroker coming
1988 80 quattro - 4.2 powered FrankenAudi made from 13 cars and counting...
Toph
Posts: 314
Joined: Sat Mar 02, 2013 9:29 am
Location: NH

Re: Cheap Parts - Name your own price and save...

Post by Toph »

I want to say no, but I'm honestly not sure...I'll check some part numbers tonight. Just to be clear, I don't have one, so I'm assuming that you do. Shipping would probably put it out of budget unless you wanted to trade for something of mine.
90 Coupe Quattro - 3b + 01e
87 4000 - future trail rig
00 a6 2.7t 6speed - winter beater
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: Cheap Parts - Name your own price and save...

Post by Kuma »

I need a rear diff mount. the one that goes on the left side of the rear subframe. mine is broken in half.

ill give you 15 shipped?
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: Cheap Parts - Name your own price and save...

Post by Kuma »

No prices, what is it worth to you?
I'll try to get pics up here soon, pm me for something specific for the time being please.

Coupe Quattro:

Grey interior, only what's listed:

-Door handles



WAY too many engine/transmission mount arms, so break yours soon before these are worth their weight in aluminum!


So 30$ for the drivers side door arm pull rest thingy?

shipped? plus shipping?


i realize you said you have brackets not actual mounts....


if you do have a good one though, i would gladly take it.


kuma85@gmail.com
Toph
Posts: 314
Joined: Sat Mar 02, 2013 9:29 am
Location: NH

Re: Cheap Parts - Name your own price and save...

Post by Toph »

When you say rear diff mount, I take it you mean the mount arm itself since you specified a side. I'm not sure that I have one of those. I do have the armrest, I'll find out on shipping and let you know. I'm not looking to make much on it, just mainly to cover my time and the cost of shipping.

Still need to check out that bumper grill situation
90 Coupe Quattro - 3b + 01e
87 4000 - future trail rig
00 a6 2.7t 6speed - winter beater
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: Cheap Parts - Name your own price and save...

Post by Kuma »

i need a mount. the bushing thingy, the rubber on my mount broke in half(looks like the trans mounts)(i guess its the same mount?). even a good used one is better than what is on the car now.

Yes i need the door arm pull if at all possible. Send me a paypal request via kuma85@gmail.com

please and thank you.
Toph
Posts: 314
Joined: Sat Mar 02, 2013 9:29 am
Location: NH

Re: Cheap Parts - Name your own price and save...

Post by Toph »

Hey Stephen, I found a used diff/trans mount that I can send along with the door pull. I will get them packed up and let you know what shipping will be and we can work out a price from there.

Still need to check on lower bumper grille.
90 Coupe Quattro - 3b + 01e
87 4000 - future trail rig
00 a6 2.7t 6speed - winter beater
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: Cheap Parts - Name your own price and save...

Post by Kuma »

sounds good
DE80q
Posts: 2572
Joined: Mon Mar 04, 2013 9:25 am
Location: York PA 17403

Re: Cheap Parts - Name your own price and save...

Post by DE80q »

Toph, I have a 4k FWD bar and arms. PM me. would be easy to have Tim pick them up when he comes down to give me a hand.
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: Cheap Parts - Name your own price and save...

Post by Kuma »

any updates my friend?
Toph
Posts: 314
Joined: Sat Mar 02, 2013 9:29 am
Location: NH

Re: Cheap Parts - Name your own price and save...

Post by Toph »

Dumpster is on site. I have your door pull and diff mount set aside Kuma.
90 Coupe Quattro - 3b + 01e
87 4000 - future trail rig
00 a6 2.7t 6speed - winter beater
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: Cheap Parts - Name your own price and save...

Post by Kuma »

hey buddy, i broke down and bought new mounts from FCPeuro. I will need the arm rest, but i might need both.

cost for both arm rests?
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: Cheap Parts - Name your own price and save...

Post by Kuma »

ok scratch the armrests, cost for the ebrake handle? good shape?
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: Cheap Parts - Name your own price and save...

Post by Kuma »

my buddy needs:


I need door cards (my arm rests are good), drivers' side window regulator, parking brake lever (mine is gouged in several places) and roof antennae.


shipped to Odessa TX
Toph
Posts: 314
Joined: Sat Mar 02, 2013 9:29 am
Location: NH

Re: Cheap Parts - Name your own price and save...

Post by Toph »

No ebrake cover that I know of but I'll double check. I will pm you later with door card pictures - front only? No antenna, sorry. Get ahold of Shawn vt10vt about window regulators.
90 Coupe Quattro - 3b + 01e
87 4000 - future trail rig
00 a6 2.7t 6speed - winter beater
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: Cheap Parts - Name your own price and save...

Post by Kuma »

roger, door cards are covered for now.


the rest lmk if you have.
Toph
Posts: 314
Joined: Sat Mar 02, 2013 9:29 am
Location: NH

Re: Cheap Parts - Name your own price and save...

Post by Toph »

Added some pictures.
90 Coupe Quattro - 3b + 01e
87 4000 - future trail rig
00 a6 2.7t 6speed - winter beater
Kuma
Posts: 998
Joined: Sat Mar 02, 2013 12:00 am
Location: Killeen, Texas
Contact:

Re: Cheap Parts - Name your own price and save...

Post by Kuma »

hey PM me your email, i have a buddy who needs grey door parts

for his cq
PITTS
Posts: 7
Joined: Tue Mar 19, 2013 11:45 am
Location: NH

Re: Cheap Parts - Name your own price and save...

Post by PITTS »

Is that a Distributor of a 7a ?? Did it come off a running motor?

Thanks!
Post Reply