Ben's Oceanic 4kqt - BBQ X readiness - The last year

85oceanic · Post by **85oceanic** » Fri Jun 10, 2011 7:36 pm

Made a bit more progress today...

40v4kq · Post by **40v4kq** » Fri Jun 10, 2011 7:39 pm

set her on the ground and go for a spin

or maybe you should wait until you have rubber on those pretty wheels

85oceanic · Post by **85oceanic** » Fri Jun 10, 2011 7:42 pm

Dan, you have no idea how much I wish I could take it for a spin! To bad it doesn't have an engine yet! :(

Edit: cough... or front CV shafts, Tires, ecu ... etc.

Post by **Hank** » Fri Jun 10, 2011 8:03 pm

Extremely jealous of the brakes. Well done Ben

85oceanic · Post by **85oceanic** » Fri Jun 10, 2011 8:54 pm

Thank you Hank!

jcarrick · Post by **jcarrick** » Sat Jun 11, 2011 8:14 am

Looking good ben! I wanna come up and see this thing in person

40v4kq · Post by **40v4kq** » Sat Jun 11, 2011 7:30 pm

I finally figured out what you are missing...beside an engine, ecu, cv's,blah blah blah.

WHEEL STUDS

Get em, trust me you will love having them. I got mine from prestige wheel.

dwhite4245 · Post by **dwhite4245** » Mon Jun 20, 2011 10:39 am

Are you gona be done for Pacific Waterland???

dwhite4245 · Post by **dwhite4245** » Mon Jun 20, 2011 10:42 am

Are you gona be done for Pacific Waterland???

85oceanic · Post by **85oceanic** » Mon Jun 20, 2011 11:32 am

dwhite4245 wrote:Are you gona be done for Pacific Waterland???

Dude... I wish. :tard: I plan on being there though, I may drive the Pathfinder down and wonder around.

@ jcarrick - Anytime you head up this way, shoot me a PM and your more than welcome to come check it out man!

@ Dan - Your totally right man. I am SOOOO sick of messing around with lame wheel bolts.

CV Shafts are on their way BTW.

Next up... tires. 8)

85oceanic · Post by **85oceanic** » Thu Jul 07, 2011 2:17 pm

Teaser ... more to come.

my2000apb · Post by **my2000apb** » Thu Jul 07, 2011 2:28 pm

40v4kq · Post by **40v4kq** » Thu Jul 07, 2011 4:08 pm

Please tell me you have the cv's in and torqued. Rolling the car around without them in will ruin the bearings in short order. Derek learned that the hard way.
What tires did you end up with...brand,model,size? I'm gonna guess Dunlop star-spec 215-40-17. Looks fantastic BTW.

85oceanic · Post by **85oceanic** » Thu Jul 07, 2011 10:31 pm

40v4kq wrote:Please tell me you have the cv's in and torqued. Rolling the car around without them in will ruin the bearings in short order. Derek learned that the hard way.
What tires did you end up with...brand,model,size? I'm gonna guess Dunlop star-spec 215-40-17. Looks fantastic BTW.

SO No, I don't have the front CV's in yet. It won't move another inch till they are in, I also a bit concerned that it is having a problem turning right, so I will sort that out tomorrow. Also, I do wish I could have afforded such a great tire right now, but i really need to focus on getting it going and driving. Then I can spend big money on tires, right now it has a used set of Federals that have 85% tread that I picked up for 150 mounted and balanced. So I couldn't turn it down, especially where i need to get it on the ground so I can hammer out other issues. I will be getting the Dunlops once these get roasted.

Oh and these are: 205 45 17

85oceanic · Post by **85oceanic** » Fri Jul 08, 2011 1:26 pm

Ok, so today I couldn't help myself. I had to throw the front end parts on just to see what it will look like.

It's funny how tastes change with time, I am really considering pulling out the LEDs I installed a couple years ago. But anyways, I thought I would throw up some pictures of the car all washed, paint peel and all! I really hope the front end settles nicely once the engine is in, right now it just sticks up in the air!

I just like this shot

I think this picture really shows off how freakin big the brakes are.

... Pay no attention to the catty-wompus drivers side headlight ^^^^^^^^^^^^^^^^^^^^^^^ :tard:

I know I am a picture whore, but what can I say? I'm bored? hahaha

Hope you guys enjoy!

40v4kq · Post by **40v4kq** » Fri Jul 08, 2011 6:34 pm

I like that first pic too...Looks very professional. Once the motor is in it will settle the nose down, so don't worry about it. the rear should settle a little too, but it's anybodies guess as to how much. And as always pictures are welcomed, the more the merrier. Be careful with the used tires, when I was going to pick and pull with Derek about a two weeks ago we came around a corner and there was a 510 in the ditch. It belonged to the brother of a motorgeeker that Derek knows(he was the tow truck driver at the scene). The poor guy had just finished restoring it over like five years and only had 300 miles on it, and it was totally messed up. His tires did not look good at all, like "don't even drive on them" not good. Dont get me wrong, your tires may be fine. Just hearing about used tires made me think of that so I thought i'd share. Keep up the awesome work Ben, and let the photos roll.

loxxrider · Post by **loxxrider** » Fri Jul 08, 2011 7:05 pm

Definitely keep it up. Car looks awesome!

Jersey90TQ · Post by **Jersey90TQ** » Fri Jul 08, 2011 7:14 pm

looks good, def a fan.

jcarrick · Post by **jcarrick** » Fri Jul 08, 2011 9:53 pm

Looking good Ben! Whens the motor going in??

Kliminati · Post by **Kliminati** » Fri Jul 08, 2011 10:06 pm

[quote=

[/quote]
This is pure sexyness

85oceanic · Post by **85oceanic** » Fri Jul 08, 2011 10:53 pm

Thank you guys!

I really appreciate all your feedback! Dan, I checked over the tires VERY carefully, specifically for signs of cord separation, bludges etc. They come with a warranty from Schuabies so I think I will be in good shape till I can afford the holy grail (Dunlops).

Jon, the engine has yet to be built up, soooo as soon as I scrape my pennies together I will get the sucker built up and in. I can't wait! Seeing this everyday is going to provide HEAP LOADS of motivation. I think it's time to pick up a 2nd job again so I can get to it.

85oceanic · Post by **85oceanic** » Wed Aug 03, 2011 9:35 pm

SO, things have kind of slowed back down in the world of my 4kq, and I thought it was a good time to take stock of what kind of mess I have going on right now and pretty much for me that means photo documentation haha...

The mess ...

Engine Bay...

Interior...

Trunk ...

and some other random stuff...

and the new sig...

I have so much work left to do just looking at all this! I can't wait to get this thing on the damn road!

40v4kq · Post by **40v4kq** » Wed Aug 03, 2011 10:53 pm

Keep pluggin away and it will be driving before you know it. I forgot you had found and installed a set of script seats.....so jealous. Make sure it's ready for next summer so we can do a road trip.

dubsmith · Post by **dubsmith** » Fri Aug 05, 2011 5:28 pm

Niiiccceeee. Looks familiar, mess wise lol. Keep plugging away at it! Just look at me. 3 years and I almost have mine done!!! :slap:

JT4k · Post by **JT4k** » Fri Aug 05, 2011 6:22 pm

Looks good man.... keep up the amazing work.

Ben's Oceanic 4kqt - BBQ X readiness - The last year

Re: Ben's AAN 4kq - Working on (rear) Swaybar, Weekend push

Re: Ben's AAN 4kq - Working on (rear) Swaybar, Weekend push

Re: Ben's AAN 4kq - Working on the front brakes & suspension

Re: Ben's AAN 4kq - Working on the front brakes & suspension

Re: Ben's AAN 4kq - Working on the front brakes & suspension

Re: Ben's AAN 4kq - Working on the front brakes & suspension

Re: Ben's AAN 4kq - Working on the front brakes & suspension

Re: Ben's AAN 4kq - Working on the front brakes & suspension

Re: Ben's AAN 4kq - Working on the front brakes & suspension

Re: Ben's AAN 4kq - Working on the front brakes & suspension

Re: Ben's AAN 4kq - Working on the front brakes & suspension

Re: Ben's AAN 4kq - Working on the front brakes & suspension

Re: Ben's AAN 4kq - Working on the front brakes & suspension

Re: Ben's AAN 4kq - Working on the front brakes & suspension

Re: Ben's AAN 4kq - On the ground

Re: Ben's AAN 4kq - On the ground

Re: Ben's AAN 4kq - On the ground

Re: Ben's AAN 4kq - On the ground

Re: Ben's AAN 4kq - On the ground

Re: Ben's AAN 4kq - On the ground

Re: Ben's AAN 4kq - On the ground

Re: Ben's AAN 4kq - On the ground

Re: Ben's AAN 4kq - Taking stock

Re: Ben's AAN 4kq - Taking stock

Re: Ben's AAN 4kq - Taking stock