Page 48 of 125
Re: Jim Green's 90 20vt + PTE5857 = 472whp - 1 FPR
Posted: Tue Sep 21, 2010 8:35 am
by audifreakjim
Got the drive shaft back and they said the U joint was off center because it was overhauled at some point and not assembled with the correct machine that presses the cups in at the same time. They also tried to tell me someone "added" the retaining clips and this was part of the reason it was off center. Funny, it is a 4kq drive shaft and all of them have the clips. I call BS and will find a new shop.
Greg fortunately had just finished bragging the night before about his score from the junkyard a mint 4kq center drive shaft so I begged him to sell it to me
Here is one of the many projects going on.. Prototype Air intake.
Attachment ( 23477 ) : IMG_3940[1].JPG
Re: Jim Green's 90 20vt + PTE5857 = 472whp - 1 FPR
Posted: Tue Sep 21, 2010 8:53 am
by audifreakjim
I was going to run this as is, but the plastic is just too close to the header so I am going to duplicate it in sheet metal.
BTW, the air filter goes inside the canister
Attachment ( 23478 ) : IMG_0182[1].JPG
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Tue Sep 21, 2010 8:56 am
by Hank
Whats the OD of the pipe, and the od of the clamp on?
are the bolts holding anything?
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Tue Sep 21, 2010 9:09 am
by Mcstiff
Not sure about the quality or 700 CFM but...
http://store.spectreperformance.com/pro ... 0.0?pp=35&
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Tue Sep 21, 2010 9:55 am
by audifreakjim
OMFG, that is exactly what I am building. I would still need to modify that one, so I think i am going to just keep at my original design.
Hank, yes the bolts clamp the top cover to the 7" tube. I need a way to get to the air filter, and this will be a ram air so it needs to be well sealed. I think I am going to take a long lunch in the garage with the welder and come up with something more to show you guys.
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Tue Sep 21, 2010 10:08 am
by SEStone
So where're you going to put this thing?
Sam
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Tue Sep 21, 2010 10:11 am
by Mcstiff
SeStone wrote:So where're you going to put this thing?
Sam
90ยบ down?
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Tue Sep 21, 2010 11:39 am
by audifreakjim
SeStone wrote:So where're you going to put this thing?
Sam
In my pants
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Tue Sep 21, 2010 12:14 pm
by PRA4WX
A sock would be way more comfortable "bulge enlargement modification" than an air intake........
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Tue Sep 21, 2010 9:40 pm
by audifreakjim
OK, I got a little distracted on building a new heat shield. I needed this in place anyways before I could accurately place the intake
Attachment:[/quote]
IMG_3942.JPG [ 2.24 MiB | Viewed 589 times ] [/quote]
Attachment:[/quote]
IMG_3944.JPG [ 3.14 MiB | Viewed 589 times ] [/quote]
Here is where it goes, Ed.
Attachment:[/quote]
IMG_3945.JPG [ 3.01 MiB | Viewed 589 times ] [/quote]
Attachment:[/quote]
IMG_3950.JPG [ 3.05 MiB | Viewed 589 times ] [/quote]
I figured out the angles I need with toilet bowl fittings.
I should have some more time on Thursday to continue with the fab.
Attachment:[/quote]
IMG_3952.JPG [ 2.56 MiB | Viewed 589 times ]
[/quote]
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Wed Sep 22, 2010 1:53 am
by quattro87
Nice! Are we gonna see it in person up in Vegas?
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Wed Sep 22, 2010 7:59 pm
by audifreakjim
Hopefully
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Mon Oct 04, 2010 9:45 am
by audifreakjim
The car didn't skip a beat at the Buttonwillow event, 40 minute track sessions @ 105 degrees, I was very impressed. I got tired before the car did!
Here is the finished intake, it is ugly, but I think it works very well. It was hard to tell if there were any gains on the way to the track because it was so hot, but on the way home after the weather cooled down it was very noticable on the freeway. Boost definitely builds sooner and even in 6th gear I get pretty brutal passing power at 3000 RPMs.
I finally got some awesome looking welds on my last 5" of bead, but it works so
Attachment:[/quote]
IMG_3956.JPG [ 2.46 MiB | Viewed 1314 times ] [/quote]
Attachment:[/quote]
IMG_3955.JPG [ 2.6 MiB | Viewed 1314 times ] [/quote]
Attachment:[/quote]
IMG_3957.JPG [ 2.07 MiB | Viewed 1314 times ] [/quote]
The type89 stable
Attachment:[/quote]
IMG_0187.JPG [ 662.63 KiB | Viewed 1314 times ] [/quote]
The current project I have to finish before Vegas
Attachment:[/quote]
IMG_0192.JPG [ 1.76 MiB | Viewed 1314 times ]
[/quote]
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Mon Oct 04, 2010 9:52 am
by loxxrider
Sweet! Everything looks pretty good.
That pic makes me want to paint my 90 white.
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Mon Oct 04, 2010 10:58 am
by Hank
I need double of what your are doing for the meth kit Jimmy
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Mon Oct 04, 2010 5:33 pm
by SEStone
Any change in intake volume (sound) with that setup? Or pictures of where the duct opens to on the bumper? Or pics of it in the car? That's slick.
Sam
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Mon Oct 04, 2010 8:13 pm
by Derracuda
hmm, cool intake idea. i might have to copy this down the road 8)
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Tue Oct 05, 2010 7:57 am
by red coupe
Have you decided were to mount the pump.( w/inj )
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Wed Oct 06, 2010 7:50 pm
by audifreakjim
SeStone wrote:Any change in intake volume (sound) with that setup? Or pictures of where the duct opens to on the bumper? Or pics of it in the car? That's slick.
Sam
Yes, the car is quite a bit quieter, but I still get a nice turbo whistle.
Here are some more pics
Attachment:[/quote]
IMG_3960.JPG [ 2.94 MiB | Viewed 1148 times ] [/quote]
Attachment:[/quote]
IMG_3963.JPG [ 2.78 MiB | Viewed 1148 times ] [/quote]
Attachment:[/quote]
IMG_3971.JPG [ 3.32 MiB | Viewed 1148 times ] [/quote]
As far as the tank, of course I put it in my HUGE trunk!
Attachment:[/quote]
IMG_3959.JPG [ 2.02 MiB | Viewed 1148 times ]
[/quote]
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Thu Oct 07, 2010 4:44 am
by audiPete
audifreakjim wrote:[quote=As far as the tank, of course I put it in my HUGE trunk!
Jim - I take it that you won't be taking the vomit comet grocery shopping or to the local home improvement or hardware store?
For anyone who has never seen a B3 90 trunk, it makes a good second glovebox. (probably smaller than a 4000 trunk.)
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Thu Oct 07, 2010 6:33 am
by audifreakjim
Seriously. The position actually works perfect, it will hold my toolbox in place, allow for one bin of crap in front of it, my jack on the side, and random crap on top.
Plus don't forget they completely redeemed themselves by adding a ski bag. Yea right!
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Thu Oct 07, 2010 11:55 am
by SEStone
Gah, one more question here--is that one of the cheapo fiberglass RS2 bumpers? How did it end up fitting/looking once in paint?
Sam
Re: Jim Green's 90 20vt + PTE5857 = 472whp
Posted: Thu Oct 07, 2010 7:36 pm
by audifreakjim
Re: Jim Green's 90 20vt + PTE5857 + Meth = 472++whp
Posted: Fri Oct 08, 2010 4:52 am
by audiPete
Jim:
Incredible fabrication as always..
..the lack of corrosion on the car just compounds my jealousy.
Re: Jim Green's 90 20vt + PTE5857 + Meth = 472++whp
Posted: Fri Oct 08, 2010 10:21 am
by 85oceanic
:woowoo: looks great!!!! Sounds like a fun ride!