Jim Green's 90q 20vt - 636whp 07k

speeding-g60 · Post by **speeding-g60** » Wed Jun 03, 2009 2:42 pm

i heard some S2 axles got put in the mail today

audifreakjim · Post by **audifreakjim** » Wed Jun 03, 2009 5:42 pm

ralleyquattro · Post by **ralleyquattro** » Wed Jun 10, 2009 10:48 am

Jim,

What is the code on that tranny. It has 4 mounting holes in the tail housing (2 on each side), a lof of these 01Es do not have them, I am just curious what cars this version came on.
Looks like they might be good enough to use as mouting points a'la rally cars i.e. mount direct to the body and forgo the subframe mounts.

Thanks in advance

speeding-g60 · Post by **speeding-g60** » Wed Jun 10, 2009 11:01 am

are those holes for the Pro-Con 10 stuff?

ralleyquattro · Post by **ralleyquattro** » Wed Jun 10, 2009 11:15 am

No, holes in the tail section on both sides (2 per side). The two on the pass side are close to the oil return boss on cars that have oil cooler pumps.
The pass side onces are more apart and you can see them in Jim's last pic.

Looks like they might be used for exhaust hangers on some cars.

Cheers

audifreakjim · Post by **audifreakjim** » Wed Jun 10, 2009 5:00 pm

CBD90230

ralleyquattro · Post by **ralleyquattro** » Wed Jun 10, 2009 5:30 pm

Cool, thanks!

Mcstiff · Post by **Mcstiff** » Fri Jun 12, 2009 9:31 pm

ShavedQuattro wrote:oh my, that is good.. you would think that the camera man had just seen a UFO land on the end of the track!!! He is trippin out!! Well that was a good 3 am laugh!!

I just noticed that the vid was posted by a guy with a Stg 3 B5 S4.

Wizard-of-OD · Post by **Wizard-of-OD** » Sat Jun 13, 2009 6:30 am

Looking good Jim

audifreakjim · Post by **audifreakjim** » Tue Jul 28, 2009 9:55 pm

Made some progress this weekend. There were a few little fabrication issues that needed to be addressed

Made a bracket for the flywheel VR sensor

Mounted up the new FW and Billet Clutch from 034, sexay

I bleed the clutch tonight and it feels a little too light, so I need to double check everything, It seems like it is kind of releasing, but I need to fire it up and see if it fully disengages. Due to the coolness of the clutch, I can slip a screwdriver between the plates and feel it releasing the pressure.

And then, finally, a real radiator :-) I went with the 034 full mounts version, less drama is good at this point.

Getting close!

Post by **Hank** » Tue Jul 28, 2009 9:57 pm

yeeeeha. I am excited Jim!

audifreakjim · Post by **audifreakjim** » Tue Jul 28, 2009 9:59 pm

Me too, I am sick of watching everyone else have fun at the track!

fasterthenrs2 · Post by **fasterthenrs2** » Wed Jul 29, 2009 2:00 am

:woowoo: :woowoo:

death 4kqt · Post by **death 4kqt** » Wed Jul 29, 2009 4:01 am

oh man, that clutch and trans are going to be sweet! can you take some vids of your car for us when you get it going? :-D

ChrisAudi80 · Post by **ChrisAudi80** » Wed Jul 29, 2009 5:25 am

Just finished reading through your whole thread. At work.

:bashtard:

You rock man. I have no other words.

Now, if only you would have a YouTube channel... :-D

death 4kqt · Post by **death 4kqt** » Wed Jul 29, 2009 5:36 am

ChrisAudi80 wrote:Now, if only you would have a YouTube channel... :-D

thats what I am talking about! I have heard legends of this car from several people, but I have never seen a vid of it moving or heard the sounds of its evil powerplant.

ChrisAudi80 · Post by **ChrisAudi80** » Wed Jul 29, 2009 5:49 am

death 4kqt wrote:[/quote]

ChrisAudi80 wrote:Now, if only you would have a YouTube channel... :-D

thats what I am talking about! I have heard legends of this car from several people, but I have never seen a vid of it moving or heard the sounds of its evil powerplant.[/quote]

I was kind of hoping you could get some better quality vids of your setup and you tearing up the roads.
I am still digging your ride. Sounds great.

96 S6 auto
95 80Q AEB VEMS