93' AAN motor
Posted: Mon Mar 27, 2017 4:17 pm
Well about 17 years ago I started my Audi project. I'm new here too. I went and got an 86' Coupe GT and stripped it to the metal chassis and found a 4kq at the junk yard and brought it home and cut the floor out to put it in the Coupe. I failed miserably due to unforseen circumstances.
That's when I went and got a 1991 80q and took just the motor and transmission out this time
I was able to get a 2000 S4 DSY 6 spd. and put it in with the 4kq prop shaft. That's when I had to leave Delaware and move to Florida.
I'm still determined to build this thing! As of now I bought a 93' AAN motor and rebuilt it with IE rods.
So here I am wondering what I can do next. I'm look for a B3/B4 down here if its cheaper then towing the one I have up north down here with out being drivable and all. I live in Boca Raton, FL and is looking for a chassis to put my motor in. If anyone has any ideas please let me know. Thank you! -Andy
That's when I went and got a 1991 80q and took just the motor and transmission out this time
I was able to get a 2000 S4 DSY 6 spd. and put it in with the 4kq prop shaft. That's when I had to leave Delaware and move to Florida. I'm still determined to build this thing! As of now I bought a 93' AAN motor and rebuilt it with IE rods.
- IMG_1190.JPG (118.22 KiB) Viewed 15394 times
So here I am wondering what I can do next. I'm look for a B3/B4 down here if its cheaper then towing the one I have up north down here with out being drivable and all. I live in Boca Raton, FL and is looking for a chassis to put my motor in. If anyone has any ideas please let me know. Thank you! -Andy