The Project Pad

VEMS bluetooth serial adapters are now in stock so you can rock your VEMS via wireless communication to your laptop or Android enabled tablet / smartphone. Nothing says kick-ass-awesome like wireless tuning and fully configurable high res motorsports gauge pack

Dude, ping the developers for dual outputs!!!!!! I must have this!

Hank wrote:Dude, ping the developers for dual outputs!!!!!! I must have this!

looks like there is quite a lot to do to make that work. what it would do is repurpose the serial interface that is currently used for the GPS feature in vems, but its currently RX only.

What you *can* do, is take your current serial setup you are using for your AIM, remove the TX pin, and 't' the ground and RX, wired to this bluetooth module. that will allow two AIM stream devices to talk at the same time without messing up the stream. For instance for your MXL and an android display simultaneous.

Now that would work. It would just be a matter of alternating Bluetooth duty between a laptop and the android device to tune right?

Hank

Hank wrote:Now that would work. It would just be a matter of alternating Bluetooth duty between a laptop and the android device to tune right?

Hank

yes.

There is a possibility you MIGHT be able to get your laptop without switching by giving TX to the bluetooth adapter, and using that to comm with your laptop. you'd have to shut down your android device first, since it only works paired to one device at a time.

This is teh awesome! I can't wait to utilize this

Tempting! Maybe I'll scoop one up at Carlisle from you.

I'm interested in this! Will something like http://www.bestbuy.com/site/Rocketfish%26%23153%3B---Micro-Bluetooth-USB-Adapter/8820886.p?id=1207351932175&skuId=8820886 be enough to link with my PC?

Also, how is the connectivity with this? Anyone else running it?

I've been running this and it works very well. I hard wired it so the connection is always there - it's nice to be wireless.

That adapter should work fine if your laptop does not have Bluetooth.

When you say hard wired, are you referring to the usb port you put in the center console, or just the power controls?

power to the bluetooth module.

You can power it via 5v/1A USB port (from your laptop, for example), or it has a small power supply that you can wire to 12v for a permanent install.

Ok. Thanks.

The possibilities...



Sent from my HTC One using Tapatalk 2

Fer srs

And now I need to own a tablet.

I have one bit I think wife would not be happy if I threw it in the 4k permanently

chaloux wrote:I have one bit I think wife would not be happy if I threw it in the 4k permanently

You could mount some kind of case with a quick release in the dash, and then you wouldn't have to have it permanently mounted... like how some head unit face plates pop off.

Yeah, easy enough. It'd be cool to have it rise out of the dash

Tested the software demo on Galaxy S4 and works great! How much for the kit in USA?

Fundahl wrote:Tested the software demo on Galaxy S4 and works great! How much for the kit in USA?

$79

http://www.efiexpress.com/catalog/product_info.php?products_id=113