New Tubular manifold, used EFR Turbo, used Holset Turbo
Posted: Fri Jan 27, 2017 5:27 am
Have a few things to get out of the shop.
Prices are firm and do not include shipping. Will ship anywhere in the US or Canada if needed.
Holset H1C turbo. It's from a '99 Dodge. sold in "used" condition. $250 + shipping
20VT Tubular Exhaust Manifold $500 + shipping [/b]
This manifold is currently set up to run Tial V band with IWG turbo, It comes with the additional wastegate flange for external wastegate if desired. (would require welding to add on)
I Have some fitment pictures I'll post below, but the issue with it for what I was going to use it for, the IWG turbo is too close to the inner fender on a small chassis car.
BW EFR 7163 $550 + shipping
This is an external wastegate version of the 7163. Used off a Penske racing car. There was a run of these sold on ebay last year and I was able to snag one up. The remaining 5 or so were purchased by a guy from subaru forums who sold them off for $1200.
It spins fine and has little shaft play but I don't have the credentials to be able to determine whether or not it needs rebuilt so It is being sold in "Needs rebuilt" condition. Spins fine.
The thing about these turbos is the exhaust side inlet V-Band is slightly different size than the average tial V 2.5" band. So either the Exhaust housing needs to be replaced or a new V-band made and welded on to your manifold (hence why its so cheap!)
Also have a stock turbo and manifold if anyone is in need.
Header:
Turbo:
Prices are firm and do not include shipping. Will ship anywhere in the US or Canada if needed.
Holset H1C turbo. It's from a '99 Dodge. sold in "used" condition. $250 + shipping
20VT Tubular Exhaust Manifold $500 + shipping [/b]
This manifold is currently set up to run Tial V band with IWG turbo, It comes with the additional wastegate flange for external wastegate if desired. (would require welding to add on)
I Have some fitment pictures I'll post below, but the issue with it for what I was going to use it for, the IWG turbo is too close to the inner fender on a small chassis car.
BW EFR 7163 $550 + shipping
This is an external wastegate version of the 7163. Used off a Penske racing car. There was a run of these sold on ebay last year and I was able to snag one up. The remaining 5 or so were purchased by a guy from subaru forums who sold them off for $1200.
It spins fine and has little shaft play but I don't have the credentials to be able to determine whether or not it needs rebuilt so It is being sold in "Needs rebuilt" condition. Spins fine.
The thing about these turbos is the exhaust side inlet V-Band is slightly different size than the average tial V 2.5" band. So either the Exhaust housing needs to be replaced or a new V-band made and welded on to your manifold (hence why its so cheap!)
Also have a stock turbo and manifold if anyone is in need.
Header:
Turbo: