The Project Pad

Big thanks to gidrew for the help and garage space to put in the H&R's a couple weeks ago. Figured it was time to start documenting the very slow progress of my car to....who knows!

Attachment ( 8767 ) : HnR drivers side.JPG


Attachment ( 8766 ) : HnR front.JPG


Attachment ( 8765 ) : HnR rear.JPG

Could use some euro headlights and v8 tails .

mm yes lights - thinking about bixenon projectors within those crappy DOT buckets....and im back and forth on the V8 tails...time will tell!!

i'd like the front end to be little lower too

Here's what we've got!

-K&N drop-in
-Chipped (unknown, assume 275ish)
-Center resonator delete

pulled 3 times with very consistent results.

Before pulling the car into the shop, the owner came out and said, "wow that's old school" and was loving every bit of it "is that the stock paint?" etc. Then while driving it out said "this thing's great, it's like a limo"

....haha fat bottomed audis you make the rockin' world go round

I also ran with about 10 guys from school, a few of which were duramax chevy's.....

I have some vids i'll upload of the soot, but for number's sake, he spun his tires on the mustang dyno and put out 650whp and 1040ft/lbs :bashtard:

Attachment ( 9732 ) : dyno 1.jpg


Attachment ( 9731 ) : dyno 1 plot.jpg

Just for the sake of keeping things together....here's the link to the "V8" tails
http://www.motorgeek.com/phpBB2/viewtop ... ight=tails

nice runs.

Twice the Audi? what were you saying?

:bump:

Wheres the big turbo casey? :-D

sitting pretty next to me on a shelf

Nothing much since the dyno run, but I managed to make some smoked signals, install a boost gauge, and make the exhaust sound a bit more pronounced.

Attachment ( 10698 ) : smoked signal.jpg


Attachment ( 10697 ) : smoked signal close.jpg


Attachment ( 10696 ) : tailpipe.jpg


Attachment ( 10695 ) : boostgauge.jpg

nice placement of the gauge, I cant wait to see what happens with more funds... :-)

:stupid: :-D

i'm waiting for the snail, see what the u-boat can really do

Here's what I accomplished this past weekend, it works great!! any suggestions on how to upgrade the rear brakes? bias is a little off now :bashtard:

Attachment ( 12290 ) : DSC_0002.JPG


Attachment ( 12289 ) : SNC12833crop.jpg


Attachment ( 12288 ) : SNC12841crop.jpg

looks great Casey :bump:


btw, the bet is still on :bang:

i'll be in arlington, oregon.... :( workin' for the man now

Working for "the man"?

haha, on salary now. I'll be working in arlington for 4 weeks at a time, then home for a week for july and august, so it's lookin' like I won't be on the right coast for waterfest :x

oh I forgot to tell you, looks liek Waterfest is a no go for me unless I start getting phone calls.

Thats why I was egging you on about Carlisle, its much better than Waterfest in my opinion.

Wow nice!! Really fills up those 19s.

arlington!, i just looked it up, that's about 2.5-3 hours from me. maybe sometime we can meet up in portland 8) meet up with matt and some other p-town audi nerds? how many trips will you be making out here?

i should be there from july 6th through the end of august with a week or 2 of vaca which will probably be back in vt. I think food and drink are certainly in order!

Damn casey, now them is some brakes! I like how you are wearing a seemingly nice shirt and pants whilst installing brakes. Gotta keep up the style.

hahaha they're pretty worn out, you can't see the holes in the front of the shirt 8)

Casey, is the new turbo still sitting in the box?

sitting in my shed at my house, in need of a new shaft :x kind of bent