Page 1 of 1
Parts Rep Thread
Posted: Mon May 19, 2014 7:21 pm
by PRY4SNO
There's a few parts I'm interested in, wondering if you guys can offer any BTDT or links to prove/debunk parts I'm not familiar with. Feel free to post up with parts you're looking for info on as well.
-- Synapse Engineering Synchronic 40mm Wastegate
http://synapseengineering.pinnaclecart. ... uct&id=545-- Daetschwerks DW300 Fuel Pump
http://www.deatschwerks.com/resources/f ... -pump-tech
Re: Parts Rep Thread
Posted: Mon May 19, 2014 8:41 pm
by my2000apb
links aren't working for me
Re: Parts Rep Thread
Posted: Mon May 19, 2014 8:53 pm
by PRY4SNO
Links fixed, thanks for the headsup
Re: Parts Rep Thread
Posted: Fri May 23, 2014 3:47 pm
by PRY4SNO
Well, I bit the bullet on the Syncronic WG. Should be interesting to test back to back with Tial.
Next up on the wish list is injectors.
Anyone have any experience with Genesis II injectors? I've been reading up on Scott@USRT's posts on vortex and he's got some pretty amazing points. These are unmodified and offer superior atomization compared to your average ev14 cores one shop or another have bored out.
http://www.usrallyteam.com/index.php?ma ... ts_id=1897"]Injectors link
Re: Parts Rep Thread
Posted: Fri May 23, 2014 3:51 pm
by alxdgr8
I've never heard of a synapse wg lasting very long. Lots of reviews of broken ones getting replaced by tials after a few months.
Sent from my XT1060 using Tapatalk
Re: Parts Rep Thread
Posted: Fri May 23, 2014 3:55 pm
by PRY4SNO
LOL a little late with that tidbit.
Still, I'll take whatever links you've got.
Re: Parts Rep Thread
Posted: Sat May 24, 2014 12:38 am
by All_Euro
Slightly different I know, but my Synchronic DV has been flawless... unicorn?
Re: Parts Rep Thread
Posted: Sat May 24, 2014 12:44 am
by PRY4SNO
It definitely got (reluctantly) rave reviews from MotoIQ:
http://www.motoiq.com/MagazineArticles/ ... Valve.aspx
Re: Parts Rep Thread
Posted: Sat May 24, 2014 6:40 pm
by UrSobsessed
Marc @ EFIx sells the Deatschwerks DW300 pump. From the statistics it looks to flow slightly less than the Bosch 044 pump and is supposedly MUCH quieter. He can comment to these points as I'm sure he's installed a few at this point. Even though he sells them, I'd trust his opinion as unbiased.
Re: Parts Rep Thread
Posted: Sat May 24, 2014 6:47 pm
by PRY4SNO
My urs4 has a dw300 and it is inaudible, in a word.
Just a new brand to me, wanted some comments on the product.
Re: Parts Rep Thread
Posted: Mon May 26, 2014 4:20 pm
by PRY4SNO
Thoughts on how deep is the max for IC clearance? Using oe s2 bumpers, really don't want to have to butcher them. What I've been reading says about 3" or so to clear.
Treadstone TRV1859B
Overall Size 20" x 15.25" x 3.50"
http://www.treadstoneperformance.com/pr ... ler++720HP