The Project Pad

Posted: **Sat Jun 13, 2009 5:45 am**

First, the end product of the calipers, then the blacking out of the ecodes

more pics of them on the car later today!

Posted: **Sat Jun 13, 2009 12:03 pm**

blacking out e codes really sets it off, makes it look like a completely different headlight almost.

Posted: **Sat Jun 13, 2009 4:12 pm**

just realizing how bad the calipers look with flash photography....ick

i smell sand blast and powder coat in the future

Posted: **Sat Jun 13, 2009 5:28 pm**

Installed.....clean headlights on a dirty car :( can't wait to get it out and cleaned up

Posted: **Sat Jul 11, 2009 8:20 pm**

Finally on the road again since last September!! Currently on schedule to make it to Waterfest next weekend 8)

soooo dirty...

Clean-ish... spray down

No rubbing issues!

Posted: **Sat Jul 11, 2009 10:57 pm**

Looks nice cleaned up!! Did you paint the trim below the doors? Mine is black...

Might want some bead locks for those wheels before you take a serious corner...

Posted: **Sun Jul 12, 2009 3:15 am**

Matt wrote:Looks nice cleaned up!! Did you paint the trim below the doors? Mine is black...

Might want some bead locks for those wheels before you take a serious corner...

Yea I spent a while trying to match pearl white with a combination of 3 non pearl colors... It looks ok in the day light but once the night shows up and takes on the blue hues, it shows pretty badly.

no beadlocks!!

Posted: **Sun Jul 12, 2009 5:14 am**

looking sweet!!!

Posted: **Sun Jul 12, 2009 8:47 am**

Looks GREAT!

Your wheel fitment looks very similar to how mine sits.

I do have rubbing issues however. I have trimmed one fender liner so far. Time to go out and do the other in a bit.

Posted: **Sun Jul 12, 2009 9:43 am**

loxxrider wrote:Looks GREAT!

Your wheel fitment looks very similar to how mine sits.

I do have rubbing issues however. I have trimmed one fender liner so far. Time to go out and do the other in a bit.

yea, today it appears that one of my rear tires has begun trimming the fender liner for me

Posted: **Sun Jul 12, 2009 9:57 am**

haha yep, thats exactly what mine does. Its very mild, but annoying. I also had to trim the little rubber pieces too

Posted: **Sun Jul 12, 2009 12:27 pm**

I'm slightly jealous of your wheels Casey.. jerk...

Posted: **Sun Jul 12, 2009 6:24 pm**

derracuda wrote:I'm slightly jealous of your wheels Casey.. jerk...

no no no, that's not how this works - the motorgeek community is jealous of all that you have

but i did see another set on ebay go for $500 BIN but they were 18x9 and 11

Posted: **Sun Jul 12, 2009 6:26 pm**

Posted: **Sun Jul 12, 2009 6:36 pm**

Hmm 18x9 and 18x11 is doable...depending on the ET. I know I could fit 11's in my wheels.

Posted: **Mon Jul 13, 2009 4:15 am**

my2000apb wrote:WF?

I'm planning on it - still trying to find people to drive down with :?

Posted: **Mon Jul 13, 2009 7:53 am**

hit me up

Posted: **Mon Jul 13, 2009 12:21 pm**

WOMBAT wrote:
derracuda wrote:I'm slightly jealous of your wheels Casey.. jerk...
no no no, that's not how this works - the motorgeek community is jealous of all that you have but i did see another set on ebay go for $500 BIN but they were 18x9 and 11

jealous of my broken cars?

Posted: **Mon Jul 13, 2009 12:35 pm**

derracuda wrote:
WOMBAT wrote:
derracuda wrote:I'm slightly jealous of your wheels Casey.. jerk...
no no no, that's not how this works - the motorgeek community is jealous of all that you have but i did see another set on ebay go for $500 BIN but they were 18x9 and 11

jealous of my broken cars?

Yes, they're very nice 8)

Posted: **Wed Jul 22, 2009 4:37 am**

The 200 made the trip to New Jersey and back successfully after being out of commission for 10 months! I kind of wish I had entered the show since there wasn't much of a showing for audis of this vintage. Here it is warming up to Cory's 5k

My Waterfest 15 shwag

Yesterday I finally addressed the dash lights. I had the usual broken ground issue so that nearly all dash lights came on and using the turn signals turned my dash into a light show. It was a quick and easy fix - I wish I had done it sooner. I also installed the VDO boost gauge - no more super bright white LED boost gauge!

Here's the jumper I soldered in behind the speedo:

The end product

And here's the headlights all sorted out - city, low beam, high beam. Very nice cutoff line for the low beams!

Posted: **Wed Jul 22, 2009 4:41 am**

nice helicopter???? oh and nice looking dash and lights too

Posted: **Wed Jul 22, 2009 4:46 am**

hahaha, that's cort's airplane

i think we're the only one on the block with a plane in our garage

Posted: **Wed Jul 22, 2009 5:21 am**

cort has an airplane???? i think you guys probably have the craziest collection of toys out of most of the people i know.

Posted: **Wed Jul 22, 2009 5:26 am**

yea, easily. That's his turbo CBR1100 next to it :bashtard:

Posted: **Wed Jul 22, 2009 5:29 am**

two wild and crazy guys!

The Project Pad

FS: $4,500 Casey's 200 20v