The Project Pad

Wow, After I graduate and get a job this spring I think I know where my money is going. This seems like the perfect option to step up my currently stock S4

Marc wrote:As some of you know we can now realtime tune maps for these ecus. This is exciting from a number of angles. custom turbos like the Iroz Motorsports billet turbos will now have matching dyno tuned software avaialble for purchase providing great bang for the buck horsepower (stock oil and water lines, stock inlet hoses, stock ecu, etc). all you need is a turbo, injectors, and software and you've got a 350whp setup for under $1500 complete (injectors, turbo, and software).

We're still working out all the details, but more info will be available soon.

Is this with any GTX turbo family? AAN ecu ok to 600 BHP 450ish WHP?

yessir.

thats pretty cool marc. if you had this at the time I was thinking about pulling the trigger on the vems, I may have gone with this option. I dont regret the vems at all though. only thats its a large chunk of cash in the scheme of things. hell, I sold a socketed AAN ecu with a bosch 3bar map sensor in it to help pay for the vems. all in all Im glad I have the vems for the sheer versitility of it. I hope to have the dett taken care of with the billet and then I can really start to spend some time with the car learning the ropes on the vems. It will be nice not to have to worry about the engine for once.

This is really great! I am glad I waited on the engine management -

I will definitely be purchasing this when it's available, and I would imagine it will be perfect with Hanks billet RS2 turbo.

Marc,

Do your shop have an estimated time frame for these options, looking to pull the trigger very soon on this., Your shop is located back east is it not? Would I have to drive the car to your shop or is this something I could drive to Hanks shop and get a remote tune?

araipilot wrote:Marc,

Do your shop have an estimated time frame for these options, looking to pull the trigger very soon on this., Your shop is located back east is it not? Would I have to drive the car to your shop or is this something I could drive to Hanks shop and get a remote tune?

The billet K26 packages and chiptunes will be shipping 2nd week of April. Custom motronic mapping we can do at any time for individual customers with custom setups.

Regarding remote tuning we need our hardware present to be able to tune these ecus. I can ship my emulated ecu around to allow for remote tuning if there is no other option, but would need a $1000 deposit against damage. I have no problem flying in for live mapping as required as well.

Marc wrote:

araipilot wrote:Marc,

Do your shop have an estimated time frame for these options, looking to pull the trigger very soon on this., Your shop is located back east is it not? Would I have to drive the car to your shop or is this something I could drive to Hanks shop and get a remote tune?

The billet K26 packages and chiptunes will be shipping 2nd week of April. Custom motronic mapping we can do at any time for individual customers with custom setups.

Regarding remote tuning we need our hardware present to be able to tune these ecus. I can ship my emulated ecu around to allow for remote tuning if there is no other option, but would need a $1000 deposit against damage. I have no problem flying in for live mapping as required as well.

SO i have to fly your ass to Italy now?!

hybrid_hatch wrote:SO i have to fly your ass to Italy now?!

Ed, we need the "woo woo!" icon, stat!

If one of us comes in and puts the time in for a good 3B tune with a K26. Would that be the Chip Tune that is shipped with the packages?

If so these are going to sell like drugsv

themagellan wrote:If one of us comes in and puts the time in for a good 3B tune with a K26. Would that be the Chip Tune that is shipped with the packages?

If so these are going to sell like drugs

I've put him on notice again yesterday... As soon as the hardware is in and installed, he shall be waiting our arrival... Quick injector swap once we get there will be all that's needed...

Sent using Tapatalk for Android

Injectors will be ready 550cc Bosch's

I appreciate you fixing the spelling of my word "drugsv"

Are the units still on track to ship in April?

My half is still on schedule

Well, maybe a week behind or so, but close!

Holy chit that's purdy!

Hank wrote:My half is still on schedule

Well, maybe a week behind or so, but close!

Is one of those mine!?

Yes!

take my money!

Okay

Grillage wrote:

Hank wrote:My half is still on schedule

Well, maybe a week behind or so, but close!

Is one of those mine!?

Dont forget about me Hank!

Full blades......

Full blades.... What are the benefits to a full blade design?