Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Mon Mar 25, 2013 8:04 am
loxxrider wrote:Maybe the 034 mounts broke
But I thought they'd never heard of that before
But I thought they'd never heard of that before
The Project Pad
Ben's Oceanic 4kqt - BBQ X readiness - The last year
Page 46 of 84
But I thought they'd never heard of that before
Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Mon Mar 25, 2013 9:15 am
I will check it out here this week. If it does turn out that one is broken, I will be a bit annoyed. I have a poly front snubber with a mount that locks it in place so it can't move around. With all of that locking down the engine, you'd think that would leave no excuse for those to break.
Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Mon Mar 25, 2013 6:50 pm
7 words. Energy Poly Fox Body Mustang Transmission Mounts. God damnit!
Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Mon Mar 25, 2013 7:00 pm
audifreakjim wrote:7 words. Energy Poly Fox Body Mustang Transmission Mounts. God damnit!
Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Mon Mar 25, 2013 10:48 pm
audifreakjim wrote:7 words. Energy Poly Fox Body Mustang Transmission Mounts. God damnit!
Have been running them in multiple cars now.Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Tue Mar 26, 2013 12:38 am
I'll be ordering some to replace my stock-ers (and go with my Porsche trans and diff mounts )Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Tue Mar 26, 2013 7:35 am
Yep, I run those too thanks to Jim telling me the same thing!
Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Tue Mar 26, 2013 9:21 am
Do you guys happen to have a pn?
Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Tue Mar 26, 2013 10:02 am
I'm with Jim - work great and hold up to abuse. Just MAKE SURE to protect them from the heat of the turbo... they tend to melt a little
This was w/ a GT2871 turbo and stock manifold on a 20vt. Ended up making a MUCH better heat shield and the new mount seems to be holding up a lot better.
This was w/ a GT2871 turbo and stock manifold on a 20vt. Ended up making a MUCH better heat shield and the new mount seems to be holding up a lot better.
Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Tue Mar 26, 2013 11:02 am
85oceanic wrote:Do you guys happen to have a pn?
http://www.jegs.com/i/Energy-Suspension ... tId=773416
Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Tue Mar 26, 2013 11:57 am
Sweet, thanks Ed!
Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Tue Mar 26, 2013 12:00 pm
jretal wrote:I'm with Jim - work great and hold up to abuse. Just MAKE SURE to protect them from the heat of the turbo... they tend to melt a little
This was w/ a GT2871 turbo and stock manifold on a 20vt. Ended up making a MUCH better heat shield and the new mount seems to be holding up a lot better.
but, the fact that they dont separate even after looking like THAT is sweet. I run them as well. On my to-do list is to contact them and make the small mod to them which would make it a drop-in for us. Or just run a bunch through the mill here.
Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Wed Mar 27, 2013 8:04 pm
Well Ben I'm disappointed by the lack of outside footage with exhaust note etc... 
Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Wed Mar 27, 2013 8:37 pm
Beware: all his videos are fake and photoshopped. He claims his car beats monster STIs but we all know they are really just honda civics with body kits. I keep trying to get him to race for pinks against my 500hp 20vt but he wont do it. Lol
Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Wed Mar 27, 2013 9:46 pm
chaloux wrote:Well Ben I'm disappointed by the lack of outside footage with exhaust note etc...
Matt, I know man. You gotta be patient,I can't give it all away on the first date. lol
AngryTaco wrote:Beware: all his videos are fake and photoshopped. He claims his car beats monster STIs but we all know they are really just honda civics with body kits. I keep trying to get him to race for pinks against my 500hp 20vt but he wont do it. Lol
You sir are a moron.
HAHASIDE NOTE: I have figured out my boost oscillation problem. Looks like this turbo gets compression surge like crazy. :( The other day I was in 5th at around 3k, gave it WOT and the turbo freaked the crap out. SOOOO it looks like the under 20 pounds this turbo is amazing. But above that, at lower RPMs it's problematic.
Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Thu Mar 28, 2013 12:14 am
That's what I thought :/
Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Thu Mar 28, 2013 12:32 am
loxxrider wrote:That's what I thought :/
Just another reason to slap on that 5857.
In the mean time, you might know this Chris, do they make anti-surge housings that will work on the H1C? Just for curiosity sake.Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Thu Mar 28, 2013 2:54 am
I remember someone else not properly protecting one of those mounts and they had the same exact thing happen. A true testimony to their durability. Now get it fixed and swing by on your way to BBQ...I have a head for you to deliver to John
Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Thu Mar 28, 2013 8:16 am
85oceanic wrote:loxxrider wrote:That's what I thought :/
Just another reason to slap on that 5857.
The one I had (and McStiff now has) is anti-surge. My roommate has one that isn't. He cut out the anti-surge ring in his as the casting had everything there except the little cut-out ring by the comp blades. It is a pain in the butt, and I doubt it would help in a case like your turbo. I think that thing is just so severely mismatched in size that there isn't much you can do to help it. You could always try, but it'd be more worth your time to just get the precision on I think!
Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Thu Mar 28, 2013 8:37 am
loxxrider wrote:85oceanic wrote:loxxrider wrote:That's what I thought :/
Just another reason to slap on that 5857.
The one I had (and McStiff now has) is anti-surge. My roommate has one that isn't. He cut out the anti-surge ring in his as the casting had everything there except the little cut-out ring by the comp blades. It is a pain in the butt, and I doubt it would help in a case like your turbo. I think that thing is just so severely mismatched in size that there isn't much you can do to help it. You could always try, but it'd be more worth your time to just get the precision on I think!
I think your right man. Still kind of a bummer for it to turn out this way. Either way, it still is a TON of fun for now.
Re: Ben's Oceanic H1C/K26 AAN 4kq - Small update
Posted: Sun Mar 31, 2013 1:53 am
Trans blew 55 miles from home. Babied it 20ish, that's all she'd give. Update tomorrow.
Re: Ben's Oceanic H1C/K26 AAN 4kq - trans blew
Posted: Sun Mar 31, 2013 4:07 am
<clap clap> There is the sign you are making good torque!!@!
Sorry for the inconvenience, but I told you so
First rule of thumb when beating on an 016, have a tow strap in the boot and a good friend!
Hank
Sorry for the inconvenience, but I told you so
First rule of thumb when beating on an 016, have a tow strap in the boot and a good friend!
Hank
Re: Ben's Oceanic H1C/K26 AAN 4kq - trans blew
Posted: Sun Mar 31, 2013 5:05 am
HAHA No joke Hank, I was able to get a buddy to help me tow it home. I drove my pathfinder while he rode in Oceanic.
Anyways, it looks like I blew the spider gears right out of the center diff, which explains why I was able to lock it and run 4WD status until that stopped working too. I just got home (3am) so I will snap up some pictures tomorrow and post up. Needless to say, there isn't much center diff housing left. This also means I have to alter 5857 plans, I guess 01E is coming first.
Anyways, it looks like I blew the spider gears right out of the center diff, which explains why I was able to lock it and run 4WD status until that stopped working too. I just got home (3am) so I will snap up some pictures tomorrow and post up. Needless to say, there isn't much center diff housing left. This also means I have to alter 5857 plans, I guess 01E is coming first.
Re: Ben's Oceanic H1C/K26 AAN 4kq - trans blew
Posted: Sun Mar 31, 2013 6:54 am
Hank wrote:<clap clap> There is the sign you are making good torque!!@!
Sorry for the inconvenience, but I told you so
First rule of thumb when beating on an 016, have a tow strap in the boot and a good friend!
Hank
...i got lucky i didnt grenade mine with the hx40.Re: Ben's Oceanic H1C/K26 AAN 4kq - trans blew
Posted: Sun Mar 31, 2013 7:20 am
Damn it! I dint want to have to do a trans swap.Maybe I won't launch it...
I'll be watching this to see what all is involved.
I'll be watching this to see what all is involved.