80/90/cq parts for sale

Buy and Sell your parts here
Post Reply
DE80q
Posts: 2572
Joined: Mon Mar 04, 2013 9:25 am
Location: York PA 17403

80/90/cq parts for sale

Post by DE80q »

EDIT: no longer funding the avant, but parts are still for sale.

To help me fund the repairs to my winter sled, I need to sell off some of my spare parts, and parts I thought I might use. So here is what I can think of. I will post pics ASAP

1- B3 Stebro rear muffler. SOLD
2- B3 80 center tail lights. SOLD

3- Complete B4 head lights. These will come with the lights, corners, trim pieces, and conector pigtails. They are in pretty good condition, I just really dont want to swap over to this setup any more. Im asking $125 for these
Image
Image

4- 7a flywheel. I purchased this not too long ago as a spare. After glass beading it to clean it up, I found that it doesnt "need" to be resurfaced. It is in quite good shape, so I would assume this is a low mileage piece. All pins are intact, but the 2 long pins on the roll pins at some point. This was done before I got it. Im asking $100 for this. If you would happen to want it skimmed, I would do it for another $35.
Image
Image

B3 Gray center console with AUX gauges. Good condition with harness. Shift boot not for sale $100
Image
Image

Im sure there is more, so I will update this as I think of more.

All prices are OBO and +actual shipping.
Last edited by DE80q on Sun Mar 30, 2014 12:19 pm, edited 5 times in total.
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
DE80q
Posts: 2572
Joined: Mon Mar 04, 2013 9:25 am
Location: York PA 17403

Re: 80/90/cq parts for sale (help me fund my 200 avant)

Post by DE80q »

bump for pics
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
DE80q
Posts: 2572
Joined: Mon Mar 04, 2013 9:25 am
Location: York PA 17403

Re: 80/90/cq parts for sale (help me fund my 200 avant)

Post by DE80q »

Sale pending on Stebro!
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
DE80q
Posts: 2572
Joined: Mon Mar 04, 2013 9:25 am
Location: York PA 17403

Re: 80/90/cq parts for sale (help me fund my 200 avant)

Post by DE80q »

Bump for flywheel pics
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
DE80q
Posts: 2572
Joined: Mon Mar 04, 2013 9:25 am
Location: York PA 17403

Re: 80/90/cq parts for sale (help me fund my 200 avant)

Post by DE80q »

Tails and Stebro sold
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
DE80q
Posts: 2572
Joined: Mon Mar 04, 2013 9:25 am
Location: York PA 17403

Re: 80/90/cq parts for sale (help me fund my 200 avant)

Post by DE80q »

Open to offers
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
DE80q
Posts: 2572
Joined: Mon Mar 04, 2013 9:25 am
Location: York PA 17403

Re: 80/90/cq parts for sale (help me fund my 200 avant)

Post by DE80q »

bump
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
my2000apb
Posts: 1944
Joined: Fri Mar 01, 2013 11:52 am
Location: CT

Re: 80/90/cq parts for sale (help me fund my 200 avant)

Post by my2000apb »

I still need those cq parts ha
DE80q
Posts: 2572
Joined: Mon Mar 04, 2013 9:25 am
Location: York PA 17403

Re: 80/90/cq parts for sale (help me fund my 200 avant)

Post by DE80q »

No one needs a nice 7a fly wheel?
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
User avatar
AngryTaco
Posts: 2657
Joined: Sun Mar 03, 2013 11:38 pm
Location: Hayden Lake, Idaho

Re: 80/90/cq parts for sale (help me fund my 200 avant)

Post by AngryTaco »

I need a lightweight 20vt flywheel
1986 4000cs Turbo Quattro
2001 Dodge Dakota R/T Standard Cab
1990 V8 quattro
1995 urS6

-Hersh Performance and Racing Products-
Most orders are being refused until further notice. Please PM

Powerflex Dealer

#thuglife
DE80q
Posts: 2572
Joined: Mon Mar 04, 2013 9:25 am
Location: York PA 17403

Re: 80/90/cq parts for sale (help me fund my 200 avant)

Post by DE80q »

What you need is a flywheel from an MC2 or 3b.
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
User avatar
AngryTaco
Posts: 2657
Joined: Sun Mar 03, 2013 11:38 pm
Location: Hayden Lake, Idaho

Re: 80/90/cq parts for sale (help me fund my 200 avant)

Post by AngryTaco »

i know that lol
1986 4000cs Turbo Quattro
2001 Dodge Dakota R/T Standard Cab
1990 V8 quattro
1995 urS6

-Hersh Performance and Racing Products-
Most orders are being refused until further notice. Please PM

Powerflex Dealer

#thuglife
DE80q
Posts: 2572
Joined: Mon Mar 04, 2013 9:25 am
Location: York PA 17403

Re: 80/90/cq parts for sale (help me fund my 200 avant)

Post by DE80q »

Sorry, cant help you there. I know my 200, and Shawn's 200 both have the "flat" 016 FW, but we kind of need those. I will keep an eye out for on for you though.
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
DE80q
Posts: 2572
Joined: Mon Mar 04, 2013 9:25 am
Location: York PA 17403

Re: 80/90/cq parts for sale

Post by DE80q »

Bump.
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
Post Reply