Jim Green's 90q 20vt - 636whp 07k

by **Wizard-of-OD** » Thu Nov 17, 2005 11:54 pm

...When did this all Happen!?

by **audifreakjim** » Fri Nov 18, 2005 12:01 am

It's all Zepmorea's fault really. :wink: He was looking for a 10v header so I sold him pretty much the entire upper half of my old engine. I already miss the economy of the 10v, but this is obviously the next step for me. :woowoo:

by **Derracuda** » Fri Nov 18, 2005 12:33 am

looksa like fun

hey Jim, i bet you didn't quite know what to do with yourself when you were putting that stuff together....

:jim: *pulls header out of box, looks over approvingly, slides on head with two nuts, slips turbo on* "well, that was easy, time to pack er' up and call it a night!"

haha, it's pretty nice to pull out a piece that's been developed and you just bolt on eh?

by **audifreakjim** » Fri Nov 18, 2005 12:36 am

Exactly, my biggest problems are the IC and exhaust, which should take all of a day each to fix up. Ohh yea, I'm also doing the MR2 electric power steering pump. Now I just pray the pistons get here soon so I can get the block to the machine shop.

by **Corey** » Fri Nov 18, 2005 12:46 am

If you build it, he will come :wink:

by **Sleeps4at120** » Fri Nov 18, 2005 5:27 am

Jim, yer my hero...10 valves be damned!!! I can't wait to see how the new and improved daily driver drives.

by **dets** » Fri Nov 18, 2005 7:11 am

Sleeps4at120 wrote:Jim, yer my hero...10 valves be damned!!! I can't wait to see how the new and improved daily driver drives.

Now that i'm the only 10VT sheriff in town i must insist you don't damn them.

ahhhh, whatever...

i'm just jealous.... 8)

Looking good Jim!

by **WAUG0806** » Fri Nov 18, 2005 7:34 am

Taking careful notes for my letter to Santa here...

by **zepmoreau** » Fri Nov 18, 2005 8:16 am

10 valver here too..... keeping Jims dream alive!!!! :woowoo:

by **bradyzq** » Fri Nov 18, 2005 9:12 am

zepmoreau wrote:Yeah Jim, what is your preliminary target WHP?

One miiiiiilllliiioon WHP.

by **Highlander** » Fri Nov 18, 2005 9:17 am

Hey Jim,

Totally awesome. I'm speechless!!!

Cheers,

Craig Cook

by **JShadzi** » Fri Nov 18, 2005 9:21 am

Sniff...wipes tear....sniff....

:-)

by **Audilard** » Fri Nov 18, 2005 10:02 am

<<<<Jealous

Looking very nice Jim. I figure I'm about 2 summers away from something like this. *sighs*

by **olsonjus** » Fri Nov 18, 2005 10:15 am

Damn you Jim, I wish I could buy everything all at once. Built motor, inlet and exhaust manifolds finished. Time to ask for a raise I guess...

by **quattro87** » Fri Nov 18, 2005 11:15 am

Looking way nice!! When you went to the dark side, it looks like you're jumping in with both feet. I can't even get the 10v running again, let alone make the built 20v jump. I gotta say though if anyone deserves it you do. Way to go!

by **Sleeps4at120** » Fri Nov 18, 2005 11:28 am

Yeah, I'm still a 10v'er too, times three actually. I like combustin' it old skool yo!

by **dets** » Fri Nov 18, 2005 4:03 pm

Has your wife even left yet?

Sheesh, this thing will be up an running by the end of thanksgiving!

by **audifreakjim** » Fri Nov 18, 2005 4:30 pm

Heh, yea, she's gone till Mon. I'll have it ready to run very soon, but I'm guesing the soonest we'll see it run is a month from now since I still don't have the pistons and then the machine shop will need it for a week or two after that.

by **Toxcheap** » Fri Nov 18, 2005 4:56 pm

Holy Smokes batman when this happen??!!!
Man I really have no excuse.....you suck Jim thanks for making it so obvious to me now :-D

by **Toxcheap** » Fri Nov 18, 2005 6:49 pm

a sneak mock up picture

Attachment ( 2616 ) : DSC02731 (Small).JPG

by **200 Avant** » Sat Nov 19, 2005 8:04 am

Jim,

The project looks amazing!! I wanted to get together and meet you and Nate for the last track day, however work got in the way and it was killing me to see the great pics and not be able to play..

If you ever need an extra hand turning a wrench or holding something let me know. I'll be around over the weekend and am down your way several days a week and can break away from work (self employed) if I don't have a deadline or client on my hands.

Cheers,

Tom

by **shlab** » Sun Nov 20, 2005 3:14 pm

jim. how'd you get the wiseco pistons? did you have to fill out that custom pistons form and send it off the wiseco? how much did they charge you?

>>Emy

by **Toxcheap** » Sun Nov 20, 2005 3:19 pm

:stupid:

Good question I've been thinking about using them too!

by **audifreakjim** » Mon Nov 21, 2005 12:12 am

Ok, so on the Wiseco pistons. A buddy who has a freind that works there hooked me up big time we'll just leave it at that. :wink: I said, 83mm bore, 8.5:1 CR and he said cool, you should have them in three weeks. I think you could probably tell them it's for a ur-s4 and they would know what to make. If not I can try and share more info once I get the pistons like job #s or something.

Here's what I found out while shopping for pistons. JE is usually the most expensive, probably just because of name. But, they have a reputation of getting stuff out a little quicker and on time. Many of the others it's best to be prepared to send in a sample and wait to have it speced out. Also, talk to your local machine shop or performance shop to see what they can get.

by **audifreakjim** » Mon Nov 21, 2005 12:19 am

Got the exhaust DONE, fuel rail mounted and front cross brace re-enforced today.

Jim Green's 90q 20vt - 636whp 07k

Who is online