Any updates Obi?

Awesome progress.

How will you figure out what exactly is required to get past the no start issue with regards to what interior modules you need?

You get stuff done quickly, Brian.

Nice work. Will follow intently, loved the old vr6 build thread (and a4 before that).

How many kPa is full boost?

Can you provide any logs or data for boost profiles in 3rd or 4th gear, Jim?

Interested to see when your car starts to come alive.

I'd be checking all grounds/wiring again.

Thanks, Jim.

Yeah, i know it's not ideal, but for sake of ease i think i can live with it.

Ultimately, I'd like to utilise the flex fuel capabilities of a standalone ECU, but my fear is that once I've tried e85 (or any significant partial ethanol blend), i'll be so unhappy with the performance on ...

Unfortunately, e85 is a pain to get where I am. Its about 30mins each way, so I'll be forced to run 93oct + water meth.

Ideally I'd like to make north of 500whp with the 07K utilising the aforementioned fuel.

Will a Xona 7865 be too big for my goals - I'm more so after a good midrange, 4000rpm ...

Was there any more headway on whether the 2.0 pistons will work in an 07K application?

As per title, new, never used.

For 7A flywheels.

Asking $750USD.

Cheers

holy shit. he's back... ill be following closely.

I have a brand new KF771-SS-DXD-B southbend for sale (for 7a).

sure thing. apologies, jim.

cheers

Thanks, Jim.

Will take a look.

I posted in the 07k basics section, but it seems like there may be more traffic of 07k knowledgable people through here.

Do you know if the ECS RA4 flywheel would work with 07K & 01E? It is a 240mm flywheel but is designed for 1.8t (228mm) guys looking to convert ...

Since a 1.8t flywheel will work on the 07k, are we able to use a '240mm' flywheel designed for converting 1.8t cars to 240mm?

Same 6 bolt flywheel bolt pattern, then we have the ability to use 240mm clutch kits with the 01E?

Hi Jim,

Can you elaborate a little more on what happened with your thrust washer?

Did it spin around from the clutch engaging and munch the crank?

Great build!

It's a shame most of the old pictures no longer work (even with the Chrome photobucket plug in - assuming you were using photobucket ...

Hi guys,

going a different direction with my build.

i waited almost 8 months for this to be built. it is brand new, never used. it is only the 1st and 2nd style set.

i stuck with synchroniser, custom ratios of 2.92 and 1.89 (i think, can confirm shortly) with straight cut gears.

this is the ...

Awesome thread.

Part of me hopes I can find one locally at some point with a toast motor.

Figured an update might be worthy.

Never did get around to putting an 07K in that car.

Unfortunately 07K never came to Australia, so i would have had to import one then go through the ringer getting it mod-plated to get registration.

I ended up getting some K24/RS6 turbos from Sean, throwing ...

Awesome project.

can't tell if you're serious about the bumper or not?

I am absolutely disgusted with the australian government.

This is a steal. Man I hate you guys and your cool cars for dirt cheap prices.

Good luck with the sale. I remember drooling over your thread from a long time ago.

man you have some cool cars.

you wouldn't find a porsche cayenne s in AUS for under 80k (one worth owning) or thereabouts.

Got some more done today. Re-fitted the headliner, took the carpet out (shit job) and really got to see what needs to be done. I'll be getting my floor pan tomorrow, then will need to trim it up and mark the floor and get some cutting done.

http://i162.photobucket.com/albums/t269/pinklightfever ...

Yeah guys, they are the same as B5 RS4 seats. My friend who lives one street over has one, RS4 just have Alcantara inserts in the middle of the seats.

Haha, yeah Nick, I am down under. I actually sold the seats and am dropping them off this morning.

Have we got any panel beaters in here? Any ...