I guess you can call this an update or a come back, recent things I've done to the car

New OEM water pump
Cobra downpipe
Serviced the diff
Converted over to a high mount intercooler setup
New rear tires
Changed to blank rotors all around
Aeromotive 340 flex fuel pump
One piece drive shaft ...

a little over 9000 miles later the car is still kicking it, it has its hiccups. Installed another rack to realize the factory cooler line was kinked from the oil pan and ended up running a super cheap 40 dollar cooler and all seems pretty well. From what I see the car needs new engine mounts and one ...

The cock pit

https://farm6.staticflickr.com/5828/21367719948_6289c42528.jpg 20150919_174302 by M.M Photography2012 , on Flickr

The power source for my guages and sensors

https://farm6.staticflickr.com/5637/20932802104_ceee2f878c.jpg 2015-09-19_10-33-04 by M.M ...

Took the car for its first ride on Thursday night before work, it sounded and drove healthy but it had some serious boost and vacume leaks. Last night while doing a boost leak down test, I discovered a plug that was leaking, the bov flange was leaking, had a serious leak by the throttle body and the ...

Well i managed to pick up a oem Maf from a friend, plugged it in and she ran smooooooooooooooooooth. After timing the motor this is how she sits at idle with the new cams

https://youtu.be/6HZ4KU5h9co

It was sopose to be done a few days ago but been hitting a few bumps down the road, and working them out one by one. The maf i was using from my friends Sr20 was the same year but different design so it didn't work. As of now the car starts but struggles to hold an idle.

Update: A bit of an update, cars getting their slowly but surely. Here's some pictures of progress.

https://farm6.staticflickr.com/5661/20296233954_381160ccfc.jpg 20150826_233244 by M.M Photography2012 , on Flickr

https://farm6.staticflickr.com/5820/20732073079 ...

UPDATE:

Cleaned and check the bottom of my head to see if it was still within spec, aswell as the deck of the motor. All was well, so me and my friend started slapping parts on.

Cleaned the block with a straight blade and scuff pad
https://farm1.staticflickr.com/721/20814593496 ...

I couldnt log on for the longest time i forgot my log in info -_-, so yea the wheel is a +20 wheel with now a 15mm bolt on spacer bringing it out to +5 and front aligment is at -4 with 7 degrees caster and toe as straight as possible.

A bit of an update, pretty much changed directions with my build. Sold off pretty much everything i couldn't use on my next setup. I bought two sr20det's off my friends. One motor is super low mileage runs, the other had a spun bearing but a fresh top end with Tomei cams and internalls.

https&#58 ...

Thanks got wheels on the car and after two alignments ( thank god a good friend of mine owns a tire shop with a alignment machine ) here's how she currently sits, I was in downtown brooklyn and had to grab a scenic photo that never fails...

https://farm6.staticflickr.com/5590 ...

Soooo a little update, signed up for an event last Saturday and spent a good week preparing my car for this event, ALOT of blood, sweat, time, money blew that week. In the end after everything was installed to run this event N/A comfortably and still have fun, my RLCA decided the break off its ...

Thanks for the reply, and feedback. I got a deal on the gauge its not what I orginally wanted to run but cant pass up on a deal. The cars getting a mild safe custom rom tune. Couple of people I know had no issues with the rom tune so the guage is more for peace of mind lol

Whats up guys, little update..... been awhile

But i ordered more stuff then, I originally planned on getting. My friend told me it would just be more logical and less of a headache to pull the motor out and to wrench on it.
So knowing that my motors going to be pulled for this project, and ...

word on the street is you getting some stuff done and aquired some new stuff

Some parking lot thuggen after getting kicked out of multiple other areas

www.youtube.com/embed/5h22FQHbQys?list= ... 4L7kYuCZZg

WInter setup is currently 225/60/16 blizzacks in the rear and 225 50 16 good year something snow tires in front

Thanks WOMBAT, no real updates quit my job a few weeks ago waiting for my new job to start up. BUT it snowed for a little but yesterday in ny so heres a little manji action before school. http://www.youtube.com/watch?v=Pai_HENS ... 4L7kYuCZZg

Picked up Navan side skirts and Kouki rear valences.


unnamed by M.M Photography2012, on Flickr

Yea old tensions rods were destroyed. Every time i would apply the brakes at highway speeds to slow down the wheel would shake uncontrollably. Thought it was the lower control arm bushings, but when i removed the LCA to install new balljoints the bushings where just fine. Noticed the tensions rods ...

Picked up some metal spherical tension rods for my car

http://farm8.staticflickr.com/7322/11020362953_cf10dc33b8_z.jpg
20131121_162342 by M.M Photography2012 , on Flickr

Installed....
http://farm6.staticflickr.com/5498/11020241926_7708a2a666_z.jpg
20131121 ...

Been awhile......

navan by M.M Photography2012, on Flickr

Bought a oem "NAVAN" bumper off my friend for a pretty damn good price. Only made for one year in japan. Really should make the car stand out

Update time got some shit done with the help of friends, Finally figured out how to properly install poly subframe bushings. Dissembled my head and cleaned it up a bit.

http://farm6.staticflickr.com/5330/10201659964_88fa836349_z.jpg
20131010_192448 by M.M Photography2012 , on ...

Sigh... over a month and no real updates......

Here is what is done/purchased since,
TEIN inner and outer tie rods
Diff bushings and subframe bushings
A knock sensor ( which still hasn't been installed because its a royal pain to get to )
Lower control arm bushings
R33 ebrake cables ( took over ...

height wise, yes i have adjusted them to a suitable height for now until i can fund new tires, and get a proper alignment done. I have to soften the suspension a wee bit. In the beginning i didn't mind it and it felt good, but driving back from a jersey event miserable and tired the bumps got ...